Question about One For All URC-6131 Remote Control

1 Answer

Lost the code

Hi, I was hoping to find anyone who would know the code for a one in all remote for a magnvox tv ? Thank you..

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 129 Answers

Hello, follow this link to download the manual and the codes for your remotes:
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks

Posted on Dec 21, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have a magnvox TV will my dish network remote work with it I am on cox cable all so dont know my code ??

I see you needed some help programming your remote, dgosch406, which I'd be happy to help with! Let me know the model of the receiver you have, which can be found on the front panel in the bottom left corner. Try the following codes for your Magnovox TV: 566, 770, 723, 506, 677, 724, 729, 762, and 610. If you have questions, I'll look forward to hearing from you!

Hope that helps!

Jul 30, 2011 | DISH Network IR Remote Control

2 Answers

My chunghop RM-88Euniversal TV Remote lost it code stop working.Ineed code for sharp TV to get it back working pleasze

Hi Timothy,
You may try the code below.
SHARP Codes: 004/ 009/ 079/ 095/ 111/ 112/ 114/ 122/ 123/ 124/ 173

Let me know if the codes can't access the TV.


Jun 13, 2011 | Televison & Video

1 Answer

Lost code

It's 180

Here's the Zenith Remote Code list:

Hope this helps

Chris (ziraffa)

Jan 17, 2009 | Zenith DBZN-311 Remote Control

2 Answers

Code for mikomi 15lcd250 to use my sky remote

You have probably solved this by now anyway, but I have the same tv and the code 0065 works.

Jan 02, 2009 | Televison & Video

6 Answers

Mirai TV remote control set up code

does anyone know the codes for a mirai tv for a universal remote

May 07, 2008 | Jensen TS2750J TV

1 Answer

Lost booklet of codes

the codes i have for the zenith are 1000 1001 1004 1051 1083 1151 1152 1154 1217. they come from my jensen remote list i dont know if they will work but its worth a try

Mar 27, 2008 | Jensen JER-422 Universal Remote Control

2 Answers

Code for remote control

was the tv function working before or not as sometimes the controll will only work certain tv if it did work before is it a controll that can be programmed to work different appliances or not let me know and if you need the code for the remote i will try and get them for you post back and let me know the make and model of ctrl and make and model of the telly you want to programme the controll for ...............................

Nov 17, 2007 | Televison & Video

8 Answers

Sky+remote code for my lg tv

The cose you need is 0206

Sep 15, 2007 | Televison & Video

Not finding what you are looking for?
One For All URC-6131 Remote Control Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

74999 Answers

Cindy Wells

Level 3 Expert

5300 Answers

Are you an One For All Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides