Question about Kenmore HE2 Plus Front Load Washer

2 Answers

Washer won't start at all.

I stopped the Kenmore HE2 Plus Front Load washing machine in the middle of a cycle and now can't get it to start at all now, in any of the cycles. I've tried to get it to run the spin/drain cycle, but not even that cycle will run.

Posted by on

  • 4 more comments 
  • alott1940 Jun 14, 2009

    I did leave it unplugged overnight (for about 8 hours). Does it need to be unplugged longer than that? Seems like that would be long enough.

  • alott1940 Jun 14, 2009

    How long do you think it could possibly take? Up to 12 hours? Or longer? And do you feel confident this will work? Or is the technician usually needed to reset the computer on the washer? I just don't understand how stopping a washer in the middle of a cycle can have such a negative effect on it. I'll know not to stop it in the future.

  • alott1940 Jun 14, 2009

    Can I check it again before the 24 hours are up? Or will that interfere with the resetting process? Or do you know definitely that it just needs 24 hours to reset?

  • alott1940 Jun 14, 2009

    And then when 24 hours are up, to check it, do I just plug in the power cord and try to turn it on and run a cycle? And by the way, do you know why the washer won't start again after being stopped in the middle of a cycle? This is so different from a top loader washer. My 20-year old top loader washer never had this problem.

  • alott1940 Jun 15, 2009

    Leaving the washer unplugged for more than 24 hours did not work - it still won't start. Do you have any other suggestions?

    Thanks!

  • alott1940 Jun 15, 2009

    FYI - had to call a service technician. He took care of it.

    Thanks!

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,197 Answers

Good to know that u ve got ur unit fixed..... good luck!!!

Posted on Jun 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,

You need to reset that washer, unplug the power cable and turn of your washer for more than a day, it helps you to reseting the washer.

Thanks 

Posted on Jun 14, 2009

  • 2 more comments 
  • Mukesh Kumar Jun 14, 2009

    It need some long time to reset.


  • Mukesh Kumar Jun 14, 2009

    Turn it off for 24 hours.... that will fix that issue...
    It's not a repairing issue.

  • Mukesh Kumar Jun 14, 2009

    NO, do not check it before 24 hour......


  • Mukesh Kumar Jun 14, 2009

    Front loder washers are locked when you try to stop tham in the middle of cycle.
    The only way is - unplug tham for a long time, so it delete all the internal memory (work in queue).

    regards
    all-guru

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore HE 2plus front load washer and during any wash cycle the drum won't spin and at end of cycle displays F01


Front-loading washer Kenmore HE2 plus - spinning not ...

www.shopyourway.com > Manage My Life > Questions
My Kenmore HE2 plus washer has problems with spin funciton. almost all of the ... or twins size blanket, it just won't spin, even with extra spin cycle only. ... Check to see if the washer will spin without any clothes at all in the basket. ... My HE2 will wash a very small load. ... Any bigger loads The drum will try and turn but wont.

Front Load Washer Won't Drain or Spin Video: Washing ...

? 1:54
https://www.youtube.com/watch?v=wlMoT9rgvAg
Jun 1, 2012 - Uploaded by searspartsdirect
... won't drain or spin. For more front load washing machineinformation and repai. ... If the cycle has completed and water is still left in the machine select "Drain and Spin" to remove anywater remaining in the washer. This can be caused .... I have aKenmore HE2 plus front load washer. I can't seem to get it ...

Kenmore HE2 Plus 3.6 cu. ft. Front-Load Super Capacity ...

www.kenmore.com > Laundry > Washers > Front-load Washers

KenmoreFront-Load Super Capacity Washing Machine (4753) .... super wet, and to spin the empty drum after each load to hear if anything was caught in that gap. .... 1st of all: You cannot use any other detergent than HE rated detergent - PERIOD. ... will create too many suds and clog up the machine, and the clothes won't be clean.

Jan 15, 2016 | Kenmore Washing Machines

1 Answer

Lights keep flashing and door locks without finishing cycle


Kenmore HE2 Plus Front Load Washer Keeps unlocking ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
flashing prewash and add garment lights My HE2 Plus will fill with water, but when ...Kenmore HE3 2plus wont finish cycle Washer wont finish the last1 minute of cycle. ...We ran a load twice and it still did not unlock. du is the code for cannot ... Why does the door keep unlocking and locking in between the drum rotating?

Admiral, Whirlpool, Maytag - Washer Repair - Not ... - YouTube

? 5:51
https://www.youtube.com/watch?v=oBihToN6dxs
Sep 6, 2013 - Uploaded by ApplianceVideo.com
Troubleshoot your Admiral Top Load Washer that has these following symptoms: Not Completing all Cycles ...

Washing machines - Ariston



Jan 05, 2016 | Washing Machines

1 Answer

F-24 error code so I ran a clean washer cycle, and the laundry room is now flooded.


what's f24 code? - Kenmore Elite HE3 Washing Machine ...

https://www.ifixit.com/Answers/View/85549/what's+f24+code

iFixitAug 21, 2015 - Aiman, The F24 error code indicates a water temperature sensor reading that is ... The Kenmore Elite HE3 is a washing machine by Kenmore.

F24 Error Code on My Kenmore Washer ' eHow

www.ehow.com > Home
F24 Error Code on My Kenmore Washer. Kenmore washing machines have several high-tech features, such as a stain treatment option, reduced energy and ...

Kenmore HE2 Plus Front Load Washer F24 error code ...

www.fixya.com > ... > HE2 > Kenmore HE2 Plus Front Load Washer
...error code F24 I have a Kenmore HE2T washer and I keep getting an F24 error on it.. I have no idea what is means can't find the manual help!!! The "F24" error ...

I have a Kenmore HE2T error code F24 - Fixya

www.fixya.com/support/t3608391-kenmore_he2t_error_code_f24
Dec 9, 2009 - Posted on Dec 09, 2009.

Dec 06, 2015 | Kenmore HE2 Plus Front Load Washer

1 Answer

My son pushed stop in the middle of a wash cycle, now it won't drain and it turns off right after I press START.


Check your door switch button, its just above the door latch, sometimes that button has broken, or the door has dropped abit, not aligning correctly.

Dec 04, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Cylce stops after 1st drain before spin out


I have kenmore washer front load H2 after 1st circle of wash it stop and start beeping with code F11. My email address is anarfi1212@ live.com

Jan 21, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Washing machine stops mid-cycle


F30
DISPENSER SYSTEM ERROR

when the dispenser motor cannot be driven to its proper positon.

==========The following information is for a TECHNICION SERVICE(only)========
1.- Unplug washer or disconnect power.
2.- Check mechanical linkage from dispenser motor to the top of the dispenser.
3.- Check wire hamess connections to the dispenser motot and Central Contol Unit(CCU)
4.-Check dispenser motor for power rotation.

Was this helpful?

May 10, 2009 | Kenmore HE2 Plus Front Load Washer

Not finding what you are looking for?
Kenmore HE2 Plus Front Load Washer Logo

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2328 Answers

fordexpert

Level 3 Expert

5546 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...