Question about Fujitsu Siemens SCENIC P300 PC Desktop

1 Answer

Beeper problem I have an old DOS version program wich are using the mainboard beeper. But i can not use on this computer. How can i make the beeper sound?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 729 Answers
Re: Beeper problem

I have once have a program like that, it is based on old system and it won't work on new systems. That is due to different configuration and OS of computers today... try to boot at system prompt only then run the program there... you should bypass the system operation and go directly to the system prompt then run the program there.

Posted on Oct 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

When booting the computer, there's a beep coming from the pc. how to disable?

you should not disabkle the beeper it is there for reasons like to give you warning beeps when ram or something is bad..the speaker is inside of the pc..

Jan 02, 2013 | PC Desktops


Intel 845gvsr mainboard no display problem

this problem is normal because of the BIOS chip failure normally

when u get ram out and start computer it gives beeps and when u put back the ram and power on PC it gives no beep no display.

Fix the problem:
tools required:
1. hot air gun
2. 512kb fresh bios chip/ if the old chip is right then no need of newer one
3. p3 mainboard (with the BIOS socket) for reprogramming the chip
4. dos bootable hard disk
5. bios bin file.
have not the file ,
don't worry: this file can be made from the bios chip of a working mainboard using the bios flash utility.
flashing software: best is Uniflash.

1. with hot gun, get the bios chip out of the board,
2. reprogramme the chio with correct bin file.
3. put the bios back

copy the file in dos bootable hd
run the hdd on p-3 board
pull the bios out of running board (with slight care)
put the 845gvsr bios chip in place of p-3 bios
run uniflash and flash the bios
power of p-3 computer and get bios out

for how toprogramme bios chip : check the page

on Jan 24, 2010 | PC Desktops

1 Answer

Acer aspire e500, it will not boot up. one led work.(middle "CD")


Does it display the boot screen?

Do you hear a buzzer or a beeper go off inside?

Sometimes a boot can be stopped by the ram, this is generally made visable by a buzzer or a beeper going off, this will stop the computer to prevent damage.
If it is this, you can get a new ram for about £20, pc world etc, and if you keep the packaging in good condition, you can return it, and just say it didnt work, so you dont loose anything, but youd need to put it in your self, you just unplug the computer, take off the cover, release the ram clips, take the old ram out, and replace it with the new one.

2) Another weird thing which can stop the boot is the ....DVD drive.
I had the same problem before with one of my clients, and for some strange reason, when I removed the DVD player, the computer booted.
So try un connecting your DVD drives, and then try booting

3) Are there any sensors or buttons on the case?
Some PC's have sensors and buttons on the case, with cut of the power if you take the cover off while its running.
It could be that there is a button or a sensor not coming in contact with its connector, and therefore, preventing the computer to boot up.

I hope this helps you,


Mar 27, 2010 | E-Machines T1360 PC Desktop

1 Answer

Where in the USA is carmen sandiego doesn't seem to load under vista properly? resolution and quicktime not functioning at all.

Where in the USA is Carmen Sandiego I believe is an old DOS game. It won't run properly in Vista but if you use a DOS emulator then you can properly run the game in vista cause your fooling the program into thinking that its running in the old DOS environment.

Try DOSBOX, its a dos emulator that runs in windows and it allows you to run those old DOS games. Go to its a free program and it comes with instructions on how to use it.

May 05, 2009 | PC Desktops

2 Answers

I have very old dos based program but printer is not sported with dos printer brother hl-2040 have lpt1 port also

This will be a hard one to do unless you hook it up to LPT 1 and run a dos window and print from lpt one but the thing is the dos program has to support it as well

Apr 23, 2009 | PC Desktops

1 Answer

16 Bit Vs 32 Bit Systems

You can't convert the program on the disk from 16 bit to 32 bit. However the 32 bit versions of Windows are supposed to include legacy support for 16 bit applications. What version of WIndows are you running? What's the exact errormessage you're getting?

However, I would recommend that you use a virtualization product called DOSBox. DOSBox is free software that runs older 16 bit applications on Windows (And other operating systems such as Linux) very well:

Feb 15, 2009 | Compaq Presario 5000 PC Desktop

1 Answer

Will a new PC be able to run an old DOS program?

You sound like you are living in the dark ages. Very bad idea with IT.

Anyway, get a USB floppy drive on your new PC. Problem solved.

Dec 25, 2008 | Gateway GT5220 PC Desktop

1 Answer

I need to download a program that requires windows and my computer says the program wont run in dos mode how do i get it to work?

if the program requires windows that means it was design to work with windows and not with DOS.. you may want to get an old version of the program that will actually run under DOS.. usually you may be able to do the opposite which is to run DOS program on windows.

if possible try to get a DOS version of the program you are trying to run, or better.. upgrade your operating sytem so you can run your program and possibly other DOS programs.

post the program you are looking to download and confirm what operation system you're running and I'll try to look for it with you.

Sep 27, 2008 | Acer PC Desktops

2 Answers

PC is frozen when I press WIN-key

Do you see the Hard Disk Light ON during the time your computer is frozen? If that is the case there maybe an issue with the Hard Disk Controller.

When you installed a new version of Windows XP, did you format your entire Hard disk? (Just to make sure that your computer doesn't have a viral infection?)

Also, is it that the computer freezes when you press Alt+Enter ...or is it like the computer freezes after you press the Windows Key and then Alt+Enter?

Have you tried the Alt+Tab Combination?

Oct 16, 2007 | Compaq Evo D500 PC Desktop

Not finding what you are looking for?
Fujitsu Siemens SCENIC P300 PC Desktop Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu PC Desktops Experts


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

508 Answers

Are you a Fujitsu PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides