Installing a new blank hard drive in a DesignJet T1100,T610

JDTec

• 4338 Answers
• Posted on Nov 27, 2008

SOURCE: error code 22.1:10 on HP Designjet T610

HP does not specify what that error means. It says to contact HP Support. If the unit is in warranty, Hp will repair it, free of charge.
HP and Compaq products
800-HP invent
or
800-474-6836 24 hours a day, 7 days a week for most products U.S.: English and Spanish for most products.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

Instant Repair Help over the Phone

6ya.com

Save Time & Money by instantly connecting to...

SOURCE: mu HP Designjet T610 get mistake 21.13

Service Station error. Switch the power OFF from the back of the Printer and disconnect the power cord. Check the Primer Tubes. Reconnect the power cord and power On the Printer. Make sure that the Service Station path is clear. Remove any visible obstacles (e.g. screws, plastic parts, etc...) restricting the movement of the Service Station. If the System Error continues, replace the Service Station. If the System Error continues, replace the PrintMech PCA

SOURCE: HP Designjet T610

NECESITO UNA SOLUCION PARA MI PLOTTER T610 CODIGO DE ERROR 22.1:10

SOURCE: Error code 08:11 on hp

down load drivers
open google home page serch driver magician
update
open drivers click
driver version relese date
driver name copy serch google free down load

SOURCE: 08:11 error in hp designjet t1100

System Error: 08:YZ
Problem Description: Problem with the Front Panel.
Corrective Action: Try the following:

• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.
  

• Check that the Front Panel interface cable is not damaged and is correctly connected between the Main PCA and the Front Panel.
  

• Check that the memory module in the Formatter is installed correctly.

• Check that the connections between the Formatter, the Formatter and the Formatter are not damaged and are correctly connected.
  

• Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.
  

• If the System Error continues, replace the Main PCA

• If the System Error continues, replace the Formatter
  

• If the System Error continues, replace the Front Panel