I have just bought a Pyramat pm220 gaming chair off E-bay. I have a red and white lead going into a single jack connecter. I have a red, white and yellow two ended connecter. I want to wire up xbox 360 or tv or both!! How, I am seriosly lost ans annoyed. Is there a manual I can download as well! Dont want much do I.

Question edited for full 'make model (what it is)'.

Top right shoulder pad as you sit in it. Manual here

Owner's Manual

https://images-na.ssl-images-amazon.com > images
PDF
Read and understand this entire manual before using! For assistance contact Pyramat. ... WARNING: The Pyramat Sound Rocker is intended for indoor use only.
13 pages

..

Red and white are the left and right sound channels

Hey Hector,

The best user manual I can find is this:
http://www.hayneedle.com/images/pdf/PYR005.pdf

Get an rca cable and connect the "audio out" on the tv to the "Y" cable that came with the chair. If your tv is not equiped with an audio out then plug the red and white plug from your game console into the Y cable.

You need to go buy another cable, get a good length red and white rca cable one that suits the distance between the chair and the xbox.
Then you need to get a female to female rca adapter. Connect the adapter to the ends of the red and white audio cables on xbox, connect your new rca cable to the adapters, connect the cable to your pyramat seat. Connect xbox tv cable to tv as normal.

I also purchased the chair and the white cannon plug goes to the white plug on the back of the audio on your t.v. as does the red to the red. The green plug on the otherside of the Y cable goes to the remote device and bo the chair and remote need to be set to the same channel.

The red and white lines go directly to the televison and not the game. The green side of the plucg goes into the remote divice.

connect using the old ps3 lead and put the yellow end into the tv, then connect the white and red leads to your gaming chair. On the ps3 menu go to sound settings and change the sound settings to Av the only way for it to work hope this helps

speakers working on chair but no vibrations what am i doing wrong