Question about Motorola Mobility MOTORIZR Z3 Cellular Phone
I have an almost brand new motorizr z3 in rose. However through the ear piece i got dust under the screen and it is bugging me. How can i get it out?
Richard from UK
WARNING - DO NOT ATTEMPT THIS IF YOU ARE AT ALL UNSURE, AND DO NOT ATTEMPT THIS IF YOU DO NOT WISH TO RISK VOIDING YOUR WARRENTY!!!!! Turn off your phone, flip up the front panel and place the phone face down on a soft surface. Use a Torx T5 screwdriver/bit (available from some hardware/electronics stores or online) to carefully unscrew the small screws from the reverse of the front panel. Do not loose these!!! If you turn the phone over you should now be able to lift the top of the front cover away from the display, then slide down slightly to free it from the bottom of the display. Be very careful at this point as there is a small ribbon cable connecting the front cover buttons to the rest of the phone!!! This can be unplugged from the display board by carefully lifting it away, you may need to use a small screwdriver to gently lever it up but in my case this was not necessary. Now use a blower brush (available from any good camera shop) to blow away the dust from both the LCD display and the inside of the front cover. Then simply reassemble the phone by following the above instructions in reverse. Voila - dust free Z3!
Posted on Nov 08, 2007
Tips for a great answer:
Apr 21, 2009 | Motorola Mobility MOTORIZR Z3 Cellular...
Nov 09, 2008 | Motorola Mobility MOTORIZR Z3 Cellular...
May 08, 2008 | Motorola Mobility MOTORIZR Z3 Cellular...
Mar 27, 2008 | Motorola Mobility MOTORIZR Z3 Cellular...
119 people viewed this question
Usually answered in minutes!