- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.fixya.com > ... > Naxa Electronics > Naxa Electronics NX-667
...kd-s35 Press and hold SEL button. Press ^ button 3 times to display H (hour) turnvolume knob to change hour setting, press down 1 time to select M (minute) ...
Clock adjustment is performed in the "Initial Settings" menu.
Please follow the instructions below to access time setting.
& Hold [OFF] Pres & Hold [Muti-Control] until "Clock Set"
Appears Turn [Muti-Control] to choose setting Press
[Muti-Control] to enter setting
Time Setting: Press
[Muti-Control] to select time setting mode Press [Muti-Control] to
select time segment. Each press will select one segment of clock
Turn [Muti-Control], or click up/down to adjust time segments
functions: Clock Set, Warn Tone, AUX 1, AUX 2, SW Control, Ever
Scroll, BT Audio*, Pin Code Input*, BT Ver Info*
when bluetooth adaptor is connected
Adjusting initial settings 1 Press SRC/OFF and hold until the unit turns off. 2 Press MULTI-CONTROL and hold until CLOCK SET appears in the display. 3 Turn MULTI-CONTROL to select one of the initial settings. CLOCK SET (clock)—AUX (auxiliary input) # To return to the previous display, press DISP/BACK/SCRL. # To return to the main menu, press and hold DISP/BACK/SCRL. # To cancel initial settings, press BAND/ESC. Setting the clock Use these instructions to set the clock. 1 Use MULTI-CONTROL to select CLOCK SET in the initial setting menu. Refer to Adjusting initial settings on this page. 2 Press MULTI-CONTROL to display the setting mode. 3 Press MULTI-CONTROL to select the segment of the clock display you wish to set. Each time you press MULTI-CONTROL, one segment of the clock display is selected. Hour—Minute As you select segments of the clock display, the selected segment blinks. 4 Turn MULTI-CONTROL to put a clock right.
Setting the Time This is the mode for setting the time on the unit’s clock display. (Refer to page 51 for details concerning the clock display.) As soon as you switch to “Minute”, the seconds start counting from 00.
1. Press the FUNCTION button and select the Time setting mode in the InitialSetting Menu always select “OFF”.
2. Select “Hour” or “Minute” with the < / > buttons.
Setting the clock: 1.Press and hold the Band Button (on the left of radio)and the Clock setting button (button No:4 on the right) to display the clock. 2.Press and hold the Band button and the Clock Setting button again for 2 seconds or longer for the clock display adjustment. 3.Press the SEEK UP Button (on the right of the radio with the arrows) to set minute. 4.Press the SEEK DOWN button to set hour. 5.Press the Band button to confirm the clock setting.
Setting the time
This is used to set the time on the unit’s clock
1 Press AUDIO to select the time.
Press AUDIO until the time appears in the display.
2 Select the portion of the time display you
wish to set with 2/3.
Pressing 2/3 will select a portion of the clock
As you select portions of the clock display the
portion selected will blink.
3 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected
hour or minute.
Clock adjustment is performed in the "Initial Settings" menu. Please follow the instructions below to access time setting.
Press & Hold [OFF] (power/source button) Pres & Hold [Muti-Control] (big button that controls volume) until "Clock Set" Appears Turn [Muti-Control] to choose setting Press [Muti-Control] to enter setting
Time Setting: Press [Muti-Control] to select time setting mode Press [Muti-Control] to select time segment. Each press will select one segment of clock Turn [Muti-Control], or click up/down to adjust time segment.
setting the clock
1) Press and hold in the BAND button 0J then
press the DISP button lID to toggle the display
to the clock mode.
2) Press and hold in the BAND button 0J then
press and hold in the DISP button lID for at
least 2 seconds.
3) Select left or right to adjusf the time using the
Each time you select right "' using the aselector
~, the minutes increment up by one
digit (0 to 59).
Each time you select left <.. using the aselector
~ ,the hours increment up by one
digit (1 to 12).
*The clock only dispiays time in a 12-hour formal.
There is no way to toggle the clock to a 24-hourfonnal.
4) Press the Band button  tb set the clock
into memory. This aiso resels the seconds
counler to zero.
• The clock can only be set by turning power on to !tie
unil andswitching /0 the clock display mode. You can·
no/ set the clock when it is displayed with only the
ignition on. If you drain or remove the car's battery.
the clock must be reset. While setting the clock, if
ano#lerbutton or operation is selected. the clock sel
mode is cance/ea.