Tamper message on Vx570 credit card machine - Lands Phones

You may need to replace internal 3 volt battery and then do a tamper removal download. Call Frank at 775-338-6634

Hi,

You can remove **tamper** error in your Vx570 through tamper removal software.

[email protected]

Bad RTC and Tamper can be repaired. the machine is equipped with multiple sensors inside. if one of them goes bad, or the Battery is dead tampering or bad RTC will show this can be fix by replacing the sensor and or the battery if you need this to be done call me @ (775) 358-2922 hope this help : - )

Hi,

You need tamper removal software for your Vx pos.

[email protected]

is your verifone you are talking about is a pinpad 1000se or the creditcard machine (VX510, VX570 etc.) and bad MAC (message authentication code) and i believe if the machine is not encrypted right or the encryption was errased for some reason, bad mac will appear. I've seen some of bad mac error together with tamper error on VerifonePinpad because the battery is going bad. Replaced battery and load the encryption, pinpad works again. Hope this will help you or call (775)358-2922 look for randy and maybe we can help you further. thanks

TAMPER error message ' it means that the machines internal sensors are disturb or screwed up. Its either the machine were accidentally dropped or opened. In effect if you got TAMPEr error in your machine you will not be able to do a secured transaction like the Debit. call (775) 358-2922 look for randy and we can help you

When unit is dropped, the sensors inside may have been disturbed and the plastic might need replacing. Then tamper removal software is needed to set the unit back to factory specs. Call Frank 775-338-6634

press F2 and F4 at the same time them enter 1alpha alpha 66831 that should work if not them try BEARTIME (23378463 ) hope this help : - )

bad RTC can be repaired. the machine is equipped with multiple sensors inside. if one of them goes bad, tamperring or bad rtc will come up. call Us (775)358-2922 we can help you. thanks

It is possible that you have lost your pin-pad encryption. This may have created the error on the vx 570. I would be open to talk to you about this problem. call Frank @ 775-338-6634