Question about Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Zanussi WJS1265W Hi I have one or two problems with the following washer dryer Zanussi WJS1265W Not sure if they are related The softner compartment does not emty The dryer does not dry, timer counts down but it apears the heat side may be inoperative your help advice would be appreciated Regards Allen

Posted by on

  • 77kate77 Apr 12, 2008

    The softener compartment does not empty,and the on off light keeps flashing. Also it keeps stopping every 10mins,beeping really loud and reads E10 on the display. I do not have the manual either to refer to,and have to keep going out to my garage every ten minutes to press start then carries on washing for another ten does this on all wash settings.doesnt seem to do it on dryer.

  • Anonymous Mar 30, 2014

    zanussi wjs1265w leaking from draw



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Problem 1,
You can remove the entire drawer to clean it out it might be blocked.
Problem 2
Once again this might be the mother board, we had the same problem, easily replaced by a qualified engineer, it now works fine.

Posted on Mar 08, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Zanussi WJS1265W Error Code E65 ???

search on internet usually a forum some where

Sep 29, 2017 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Machine no power, power supply good, fuse in plug good machine will not turn on.machine type zanussi washer dryer 3 months old.

hello inside the machine theres is circuit board at the bottom there might be a glass fuse on the board which might have blown make sure the power is off before you check it good luck


Mar 18, 2009 | Zanussi WJS1265W Front Load Washer/Dryer

4 Answers

E10 code on a zanussi jet system washer

Is it a washer-dryer? E10 relates to a fault with the inlet valve.....usually the valve itself going open circuit.

Feb 26, 2009 | Zanussi WJS1265W Front Load Washer/Dryer

2 Answers

Nottaking the fabric conditioner

Zanussi washer dryer wjs1265w
This video will show you how to keep your soap draw clear and how to service the parts.
Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question..

Jan 23, 2009 | Zanussi WJS1265W Front Load Washer/Dryer

2 Answers

Zanussi ZJD 125 on a timer switch

No prob, the washer never draws the full 3kw at any one time.
Plz rate this solution.

Dec 18, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

1 Answer

Washing Machine does not work and shows error code E40

E40 is a door related problem. Possible causes are faulty door interlock or door circuit triac on the main PCB.
Most likely cause is the door interlock.

Nov 14, 2008 | Zanussi WJS1265W Front Load Washer/Dryer

Not finding what you are looking for?
Zanussi WJS1265W Front Load Washer/Dryer Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides