Question about Bell Sports Scout Jogger

2 Answers



Posted by on

  • 4 more comments 
  • samharris76 Nov 01, 2007

    Our handle broke too. Have had no luck with replacement parts...

  • Emperatriz sereno Jun 13, 2008

    I have the Bell Sports scout jogger stroller and the seat material stiching came undo in both sides of the buttom part of the seat. Can I buy that part? And how much would it be?


    betty Sereno 760/722-7896

  • nikki p Jul 01, 2008

    i had used the stroller twice, then my babysitter took it out for a stroll and the handle snapped right off in her hands when she was turning the corner.  i had already tossed the box and paperwork, so returning it isn't an option.  i also tried glueing it with a variety of crazy glues, but this part is simply not glueable.  there must be a few simple screw-in parts that can be replaced - HELP me to find the replacement parts! 

  • Anonymous Feb 17, 2009

    Handle snapped off coming off of a curb. What a piece of ****.

  • Anonymous May 16, 2009

    handle broke off at plastic adjustment connection

  • lennyloclken May 23, 2009

    The handle busted right off during a 4 mile event. It made the day very difficult. Thankfully we were not on a big hill when the handle broke. Regretfully I to, will not purchase from Bell again. I prefer manufactures who support their product with replacement parts.



2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

(800) 456-2355 is the customer service number for Bell. Unfortunately, the stroller only has a 1 year warranty and no replacement parts. I won't be buying their products again.

Posted on Dec 04, 2007

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I repaired one of these for a next door neighbor. As well as the rest is made, I can't believe they used so little thought as to the durability of the handle.

First, find someone who is handy with tools as you will have to drill out the pop rivets holding the plastic handle swivel onto the steel handles. Use a 7/32" drill bit. You have to remove the velcro glued around the base of the bottom piece to get to them.

The tubing is 20mm inside diameter / 22 mm outside diameter. This means its a fraction over 3/4" inside diameter and a fraction under 7/8" outside diameter.

Having some odds and ends pieces of pipe and electrical conduit, I chose some 1/2" plastic conduit, marked off the approx depth it needed to go into the handle tubes, and cut it to length. (one bonus here is that I was able to adjust the length of the handle to suit my neighbors stride)

The fit was not exact, but an electric sander was quickly used to fit the plastic conduit into both sides of the handles.

Through-drill the conduit through the original holes, insert 4 bolts and cap nut that fit and its done!

Posted on Sep 23, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a city classic double 2008. the real wheel broke and i need a replacement whell. where can i purchase it??

Call or email Baby Jogger they will be able to get one for you. Otherwise sometimes you can look at ebay but they usually end up being around the same price. If it is a warranty issue you can fill out this 
Customer service information:
baby jogger Contact page --- direct link to the information.Baby Jogger Company 
8575 Magellan Parkway, Suite 1000
Richmond, VA 23227

US Toll Free: 800-241-1848
8:30am-6pm (EST)

Fax: 804-262-6277
24 hours a day

Please email for:
  • General Baby Jogger product questions *
  • Replacement part inquiries
  • Personal product inquiries
  • Determining which stroller is right for you
  • Placing orders for Baby Jogger products or parts
  • Warranty Claims **
  • Locating a retailer near you
Hope that helps!

Nov 08, 2010 | Baby Jogger Baby Gear

2 Answers

Door is locked, handle is broken, how do I open the door?

YES!!! Samething happened to me!!!
I haven't fixed it yet BUT I know how to get in~You have to take the handle off...completely. May have to break the plastic...
You'll need 2 flat head screwdrivers.
You have to push the metaal part that would have been attached to the plastic handle and then pull the door out where it meets with the machine. Like where the grey inner seal is. Be gentle but firm handed. Think push with one driver~pull out with the other. Be patient as it will be fustrating the first time.
Good luch tho!!!

Mar 05, 2010 | Equator EZ 3612 CEE Front Load...

1 Answer

Jogger part needed sell new and second hand spare parts fpr all make of pushchairs including Quinney

Oct 12, 2009 | Jeep Liberty Urban Terrain Jogger

1 Answer

How to fold zooper kroozer jogging stroller

I believe that near the handle bar on either side there is plastic tubing over the metal section. You pull the plasticy bit up towards the handle bar - one has a metal lever under which you release (lhs I think) this then splits the side bars into 2 parts and in theory it drops down neatly

May 20, 2009 | Zooper Kroozer 3WD Air Jogger

1 Answer

Need replacement parts for Bell Jogger

Try kelty, Their strollers are identical and they may have even been the manufacturer of your stroller although they will say they don't have a clue..

Aug 13, 2008 | Bell Sports Scout Jogger

1 Answer


I have one for sale - I'm in Ontario, Canada if that helps.

Jun 19, 2008 | Bell Sports Scout Jogger

1 Answer


Go to this link for Quinny Parts and you can either fill out the form or call them directly at their 800 number shown.

I hope this was helpful, DutchTexan

Nov 27, 2007 | Quinny Buzz Jogger

2 Answers

How do I fold the Bell Jogging Stroller?

OH SNAP!! I just went back and figured it out. So provided your Bell Jogger Stroller is like mine, here's what you do: look for the black plastic clips on the sides of the frame. As you face the stroller head-on, these clips should be on either side of the passenger area. The clips have semi-circular grips. Pull up on these to release the clips. This should allow the push handle to fold down toward the floor. Then make sure the snaps holding the cargo pocket below are UNsnapped, allowing the stroller to completely fold in half. To set it back up again, reverse the process although I would re-snap the snaps last of all.

Nov 20, 2007 | Bell Sports Scout Jogger

1 Answer


I would look online or email and they will let you know if it's replaceable. The service isn't quick though so be patient.

Aug 21, 2007 | Quinny Freestyle 3 XL Dusk Jogger

2 Answers

Single axel for Bell jogging stroller

good luck finding one. Mine also broke and I called Bell to see if they have these poarts available. As the stroller is no longer in production, they have no parts available. I found a used one in a Goodwill-type store and am currently using it for spare parts.

Jun 02, 2007 | Bell Sports Scout Jogger

Not finding what you are looking for?
Bell Sports Scout Jogger Logo

775 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bell Baby Gear Experts

Dorel UK
Dorel UK

Level 3 Expert

1629 Answers


Level 3 Expert

77932 Answers


Level 3 Expert

102366 Answers

Are you a Bell Baby Gear Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides