Question about Teac AG-V8060 Receiver

1 Answer

Teac Receiver lost AM and FM

I have a Teac receiver model AG-V8060 that recently lost the AM & FM channels, but it still is working when used with the TV, VCR, DVD, and CD player.  Is it possible for just the AM & FM channels to fail, but still provide amplification for all other aux. devices?  I appreciate any help.


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers
Re: Teac Receiver lost AM and FM

Well, if your unit had that happen, it sounds like it is possible. ;)

I would imagine that the radio, like all the other inputs, is in itself a separate unit or circuit board. If something fails on it, it probably wouldn't harm other inputs or the actual amplification itself... just a guess on my but it makes sense. A repair shop could probably open up the case and visually inspect the tuner circuits to make sure there isn't a short or dead something somewhere.

If there is still sound in Jim's case, I would try a different antenna and/or make sure its hooked into the correct antenna hookup. if sound but antenna change doesnt help, it could still be an internal but maybe simply problem.

i'm no pro but that's my 2cents

Posted on Jun 01, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Why does my Teac receiver only light up the volume, then shut back off?

Your receiver has developed an internal short circuit and the unit is shutting down to prevent further damage. You might want to check the power supply for problems since it is a hard working area and prone to failure.

Sep 01, 2015 | Teac AG-V8060 Receiver

1 Answer

Where can I get a manual or any info at all for our vintage TEAC AG-78 AM/FM STEREO RECEIVER? Age..?

May 16, 2015 | Teac AG-780 2 Channels Receiver

1 Answer

I own a TEAC AG V1020 receiver. One channel keeps cutting out then and back in after a few minutes. When I give the volume control a quick twist louder then back down, the channel returns for a few minutes...

Turn it off and vigorously operate all mechanical controls throughout their ranges many times with special attention paid to any Tape Monitor or other rarely-used controls.

Jan 10, 2011 | Teac AG-V8060 Receiver

1 Answer

Lost not know what is the difference sound surround

Hi use this link to download the manual .

Take care.

May 18, 2010 | Teac AG-V8060 Receiver

1 Answer

Teac AG-V8520

same problem exactly

Oct 13, 2008 | Teac AG-V8060 Receiver

1 Answer

What is the Power output in Watts produced by the TEAC Model AG-V8060 Receiver

hi dmw21456

You Teac is rated at 130 watts per channel. reveiws as a very loud amp :)


Apr 18, 2008 | Audio & Video Receivers

1 Answer


i would try to call tech direct i dont see anyware else who sells them i loooked all over for u thx nick

Feb 06, 2008 | Teac AG-V8060 Receiver

1 Answer


Do you already check the Thermal fuse on the transformer.He be on the primary side between two pins ,he been protected with plastic cover.

Nov 30, 2007 | Teac AG-V8060 Receiver

Not finding what you are looking for?
Teac AG-V8060 Receiver Logo

186 people viewed this question

Ask a Question

Usually answered in minutes!

Top Teac Audio & Video Receivers Experts


Level 3 Expert

56797 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

66413 Answers

Are you a Teac Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides