Will not read any disc

All I can think of is to try other makes of blank discs. Also, if your machine ever comes up 'ERROR' and you have no control of any functions including powering it off or on-remove the plug from the wall and wait about a minute, then plug it back in.

I don't have experience with your model. I have the 1000 model and I would try a different brand of CD discs. You don't say what error message that you are getting.

Sound like you need to finalize the disc but your question is somewhat vague.

Get the manual...

http://tascam.com/product/cd-rw750/downloads/

Record READY switches the unit into a Monitor mode so you can set your levels for when you finally initiate recording.

hi, i got the same problem and found a way to solve it. i used cd-rw´s and the tascam spit them out
with a -disc-error-. i formatted the discs with my cd-burner prog. each cd-rw takes about 15-20 min.
i use burn aware, but nero or any other prog should do the trick. have fun kelly

1. First problem: "like nothing is recorded". IS something recorded or has it been left in Pause Mode so long (instead of Recording) that it just got impatient and time out?

2. Get yourself a couple of CD-RW Digital Audio discs to play with until you're past this learning curve/problem scenario. That way you can always erase them and start over without having to discard the disc.

3. Dropouts on playback. Are they repeatable - always at the same place, even on different CD players? If so, the data is bad on the disc. If not, the data is probably marginal.

4. If you have a DVD player, try to play the failed recordings in it. Some DVD players can play back unfinalized CDR's. You may be able to recover the data by copying it back to the CD Recorder from the DVD player. Just be advised that an unfinalized CD-RW may not have 'silence' following the last recorded track due to old data remaining from a previous session, so be ready to pause or stop the recorder when the last track finishes.

5. "Scratches near the outside of the CD". Were these NOT present prior to entering the CD Recorder? Do they seem to coincide with about where the recording may have failed?

6. 20 vs 19 tracks: Is this a constant problem or only when there is a failure during CD creation? If the latter, it would make sense as the last track in isn't technically completed.

hello somebody help found this optical laser for TASCAM CD-RW 750 . who can i find , what is the number ??? thanks

hello ,, how can i find optical pickup for TASCAM CD-RW 750 RECORDER ,,, what is the number of this optical please somebody help me ,, thanks ,ferr

Get a cd lens cleaner. and clean the lens. This is a CD with a small brush on one of the tracks. Usually this will solve your problem.

The manufacturer has manuals on their web site. This is where I got mine here: http://www.tascam.com/details;9,18,26,19.html