My Canon PICMA MP780 is in photo pro and I want to reset

Hi,

I will suggest you reset your canon printer, Follow this steps to reset your canon printer.

1. Turn off printer.
2. retaining button Resume/Cancel press button POWER - indicator it will catch fire by green color.
3. let go button Resume/Cancel, continuing to retain POWER.
4. press button Resume/Cancel of 2 times, retaining POWER, after which let go all buttons.
5. when indicator will be lit BY GREEN - press button Resume/Cancel of 4 times.
6. turn off printer by button POWER. Power on later to see what happens. let me know if additional information is required.

yes, first change the paper setting button to normal, then you can lower the image quality on copies.

change the paper source on the lcd screen.

Download what ever you need from the Canon support site for your model printer: 
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=10444

hi tsm


you will find all you need from here .


Photo All-In-One Inkjet Printers - Photo All-in-One Printer - PIXMA MP780 - Canon USA Consumer Products






riz.

Mine was stuck on fine photo resolution too and it wouldn't print in normal black. I tried lots of things and the only thing that seemed to work was pushing the photo button and then pushing the copy button again. Good luck.

On the MP750 (and MP780...) there are 3 small "buttons" on each side of the screen. On the right side, the lowest button controls the movement from plain to glossy to high resolution to photoprint. So, if you are on one of these settings and want to switch, you press this button. Pressing it only once will affect only the paper size, but pressing the button twice will control the resolution. To move among the options use the arrow buttons (left and right) under the menu...then just push the ok button. It worked for me.

I am guessing that you do not have the Manual.

Try this site for a Manual:

http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=All-in-One+Printers&series=All-in-One+Printers&model=PIXMA+MP780&menu=Manual

It should have the instructions you need.

Have you tried the Printers Help pages?

Good luck.

Issue: Unable to send faxes
Solution: Press ON/OFF switch to reset the multifunction device

Reset the device when it is not functioning properly.
If the device is not functioning properly or to clear memory, reset it.

1. On the operator panel, press and hold the <ON/OFF> button for one second. (The display will go blank.)
   
   
2. Wait approximately ten seconds and then press the <ON/OFF> button again.
   
   
3. Wait until the device has completed its cycling process before submitting another job request.

were the copies from the computer or something you tried to copy before?

The problem is that only "fine photo pro" is available when the paper selected is photo paper. Change source to the sheet feeder, hit the "Paper" button and then select normal paper. You'll then be able to change the quality to normal.