Crue control stoped working 2005 Dodge caravan

check it out at autozone or some place that will check the comp for you for free

replace control switch

there is 1 or 2 problems you have. there is a common problem with the instrument clusters going bad,and replaceing it can solve the problem. the other is that there is a body control module behind the fuse box under the dash,and it controls the instrument cluster

Should be in the relay box in the engine compartment near the battery.

Hi, if your cruise buttons are on the steering wheel, the problem is your clockspring under the steering wheel. Special tools are needed to pull the steering wheel, but I can send instructions if you would like to do it yourself.

On the van you have a high beam fuse and relay. On the low beam you also have a fuse and relay. Check the fuse/relay panel for a blown fuse controlling the low beam lights. If you do not find a blown fuse have some one to turn the key on and turn on the high beam lights> During this time locate the low beam headlight relay and place your finger on top of relay, have the other person to switch from high beam to low beam lights. You should feel a click in the relay when they make the switch from high to low beam. If not replace the relay and the problem should go away. Hope this will help you.

I had a issue with my cruse control. Look under the hood. The the wire to the diaphragm for the crues might have popped off the throttle pully!

I just had the same problem over christmas.... my machanic told me it was a toy in the door... however it was the plastic track that guides the wires to the motor.. it had a broken wire... Cost me $207 with parts, labor, and taxes.....

I had the same exact thing happen to me, I found out that there was a recall on the clock spring that I never received a notice for, the repair was made for free through dodge.

Check the fuel supply particularly the fuel filter and pump. Also, check the mass airflow sensor and check the engine intake system and hoses for vacuum leaks.