How to wire the wire harnes to radio - Clarion VRX755VD Car DVD Player

buy a harness .. much safer , without cutting factory wires

Easist way to get a wireing harness for it is from a auto wrecker,

OK, you need to order the wiring harness for this. This will be a harness that plugs into your stock harness. The package that the harness comes in will have the wiring diagram on it. All radio wires are standardized, so it will be easy to hook the sony wires to the wiring harness because they will match. It will only cost a few bucks and will save you from frying your entire electrical system. Hope this helps.

i found out that i wasn't geting any power to the amp, i used a harness specilly for the new radio, the harnes comes with blue with a white stripe, i connected it to the blue and white stipe wire from the radio harnes and now is working perfect.

body harness

they make an adapter wiring harness that allows u to plug the new radio harness into the your factory radio harnness, call these folks at crutchfield.com Call 1-800-319-8264 they will be able to sell u this harness. it is very cheap, about $15.00

MAYBE YOU SHOULD CONSIDER BUYING AN AFTER MARKET HARNES INSTEAD OF SPLICING YOUR WIRES THEY RUN FOR ABOUT $12 BUCKS AT YOUR LOCAL WAL-MART

go to walmart find your cd player, dash kit ,wiring kit and then this is what you do .. remove the old radio attach the wiring harnes you bought to the factory wiring harnes this will allow you to match the color code up for your new radio with out cuting wires then install the new dash kit witch will allow you to install your cd player with a factory look this should be everything ou need to know

Did you in stall by your self?? Sounds like you may have taking the memory yellow wire and with the red wire Primary switched and hooked them to the switch (Acc) on the harnes . Try looking at the harnes and see if the harness from the radio to the fact harnes hass a yello or red wires . Un hook them and try them in reverse

Best thing to do is purchase a Radio Wiring Harness. These can be purchased at a Store like Circuit City, Best Buy, WalMart (not sure of your location) or a 12 Volt Specialty shop.

This harness will connect to your new radio harness and plug directly into the vehicle harness without having to cut wires. The Radio Wiring Harness will come with color identification to match to your radio harness.

FYI http://www.installdr.com/QuickWiring.html