GE GFDN240GL1WW POWER BUTTON IS STUCK - Whirlpool LEB6300 Electric Dryer

Replace control / clock unit.

Call GE as for tech support they can help the toll free number.

Likely it is stuck Mid-Cycle. Try disconnecting power to it by throwing it's circuit breaker off for 20 minutes or so.

Turn off power to dryer. Remove power button, and relace it.

My husband just fix my GE Dryer GFDN240WW "Start Button broke" issue. Here is what he did; He removed the control knob to access the phillp screw. Unscrewed screw and lift up on control to remove panel and unhook power supply. Then set control panel on face. Unscrewed 5 larger screws to removed black plastic panel w/ mother board attached. Set board aside and located power button which was broke off. Compare button to all other buttons on panel to see how they are attached to panel. My husband used Plumbers Goop from Lowes store to attached power button like the others. Then he reassembled the dryer and presto! It works!

F7 Stuck Button
1. Function pad button stuck or
2. Bad clock. Try to free stuck button or
3. Replace Electronic Range Control (ERC).

F7 is a stuck keypad/button.
Push all buttons at random several times each. This will sometimes un-stick a stuck button.
If that does not work the keypad control will have to be replaced.

On a GE range oven F7 indicates either a function pad button is stuck or the clock on the oven is malfunctioning . F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)
It looks like you have a function button pad stuck or a bad clock.

Unstick button or replace electronic range control. you can get the required parts at www.repairclinic.com thanks.

On our a/c the remote button was stuck, not allowing any others either on the remote or the unit itself to work. Once my wife discovered which one was stuck, every button started working again.

from repairclinic.com:

F7 A = Function pad button stuck or
B = Bad clock Unstick button or
Replace Electronic Range Control (ERC)
It looks like you have a function button pad stuck or a bad clock.

Unstick button or replace electronic range control.