if i have send soft copy of usb modem drivers in a zipped form to the other person on his email address then the other person has gone to a cyber cafe and opened the link on his email n burnt it into an empty disk,what next?
download the winrar software from below link
www.freedownloadscenter.com/Utilities/Compression_and_Zip_File_Utilities/WinRAR_Download.html
then install the software and unzip the file
1. go to control pannel->add hadrware. 2. search for the modem hardware. 3. put the cd in your cd drive. 4. use the install option to install the 'modem driver' from the disk.
I have a SB5100 hook up with wireless-N router. Just this morning, I couldn't get any connection on...
(More)
I have a SB5100 hook up with wireless-N router. Just this morning, I couldn't get any connection on the internet. The internet light on the modem was off, the recieve and send lights were blinking though. Please advise me on how I can get my internet connectivity back again.
my Motorla modem is on USB and i have XP sp2 so very often  i get 0000000000 for MAC adress...
(More)
my Motorla modem is on USB and i have XP sp2 so very often i get 0000000000 for MAC adress and i regulary have IP adress from my provider?Any Help?
We've recently acquired the SB5100 with optus, but we've gotten a new laptop n it wont install...
(More)
We've recently acquired the SB5100 with optus, but we've gotten a new laptop n it wont install properly n fail the connection test at the end. My bf had this problem too with the same modem he had to call up n they charged him for 5 seconds of work n their modem worked again. If its so quick n simple why cant i figure it out? were using the USB connection coz we dont have ethernet cable. AWe have disconnected the old comp n no longer using it. Why wont it owrk.
I am about to change from dial up to broadband using Motorola's SB5100 series cable modem which was...
(More)
I am about to change from dial up to broadband using Motorola's SB5100 series cable modem which was given to me. Should I remove the dial up bits from my computer before installing the SB5100, or just leave it all as it is? Need your help... Thanks! Mike Urlich