Bfi 620 beeb and cannot select programme - Hotpoint 23 in. BFI62 Built-in Dishwasher

Hi there
A couple of points.
Many system boxes no longer have built in speakers, and if they do they are very simple and simply used for POST errors and other alarms eg CPU fan failed, overheating etc. If there is a pattern to the beeps, you need to check against your BIOS codes to ensure nothing serious is happening.
If your system is working completely normally otherwise, then I would suspect an audio problem, which might be resolved by removing and re-installing the audio driver from the disk supplied.
Cheers

http://waterheatertimer.org/Intermatic-timers-and-manuals.html#digital

Gene

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

To change font in Epson LX-300+ Printer is as follows :

Step 1
Switch on the Printer.

Step 2
Hold the Pause Button for 3 Seconds (until you here a beeb sound).

Step 3
Now you see the pause LED blinks, now you press Font button to change the font (you here beeb sound on change of each font).

Step 4
After selecting the font press pause button once.

Step 5
Thats it now your font has been changed.

Check the end of your drain hose for the clog.

OK the manual has it a little wrong.
What you have to do is switch the power off (not at the wall but on the machine itself)
then press the three buttons for around 5 seconds till you hear a beeb
next time you switch it on it will be back to the language selection
just follow the manual to select.

could a internal fault in m/c[shorted wires] water,faulty on /of switch,recheck wiring to m/c

The phone has to be a member of an ICD group and have the ring set to immediate. Since this is a SYSTEM program, I don't think you can change it without the assistance of a programmer.

If you somehow have access, it's changed in programs 620-622. You need to know which group is assigned, usually group 1 put you can find that in 622. Members are set in 620 and the ring delays are in 621.

Carl

It appears your aqua-stop has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

To change font in Epson lx300+ printer,

1. Switch on the Printer,
2. Hold the Pause Button for 3 Seconds (until you here a beeb sound)
3. Now you see the pause LED blinks, now you press Font button to change the font (you here beeb sound on change of each font).
4. After selecting the font press pause button once.
5. Thats it now your font has been changed.

Unplug the power supply to the phone, wait 1 minute and plug it in again