Question about HP Photosmart 735 Digital Camera
It will not let me take pictures, and saying that the memory is full but will not allow me to look at my pictures so i can delete them. Also, when i try to take a picture, the pictures of the camcorder and "AF" are flashing, which are by where you look into the camera. What does that mean??
Hello, NOTE: Resetting the camera returns all settings to the factory defaults. Any images or video clips stored in memory are retained. Perform a power reset of the camera Follow the instructions below to reset your HP Photosmart camera. NOTE: When turning on the camera normally, press and immediately release the power button. If the power button is held for more than five seconds while turning on the camera, the camera might reset automatically while the lens is extending.
My name is Vikram Kumar Thumu, from India-Hyderabad. I have seen your message on the issue related to error message that " Memory is Full " . I would like to provide my suggestions on the issue. I hope that this should work for you and will resolve the issue.
I guess that this could be your error message " Card full
or Memory full". The possible cause could be Insufficient room in internal memory or on the memory card to save more images. To resolve the issue please unload images from the camera to your computer, then delete all images from the memory card or internal memory. Or put a new memory card in the camera.
Please try to Power Reset the Camera once, I hope this could work on AF flashing issue.
Resetting the camera can correct many issues, such as the camera locking up or not turning off. The reset drains the power and, in some cases, causes the camera settings to revert to factory defaults.
I found more information related to the AF Flashing that you are referring. Please open below link .
Link is :
Once if you open the link, please go through the information I guess that this should help you and will resolve the issue.
However, if the issue still persists then I recommend you to contact HP Support team on this issue. Because their expertise would help you better. For your convenience I would like to provide a web link to contact HP Online Chat Technician.
Link is :
This should resolve the issue for you.
If you need any further assistance on the issue, you can mail me at email@example.com . I
Resetting the camera returns all settings to the factory defaults. Any images or video clips stored in memory are retained.
Perform a power reset of the camera
Follow the instructions below to reset your HP Photosmart camera.
When turning on the camera normally, press and immediately release the power button. If the power button is held for more than five seconds while turning on the camera, the camera might reset automatically while the lens is extending.
Posted on Oct 28, 2007
Tips for a great answer:
Jan 30, 2015 | Kodak Digital Cameras
Sep 27, 2012 | Kodak EasyShare C182 Digital Camera
Apr 02, 2012 | Samsung Digimax S730 Digital Camera
Apr 28, 2011 | Kodak EasyShare One Digital Camera
Jul 21, 2010 | Fuji FinePix A600 Digital Camera
Jun 14, 2010 | Panasonic Lumix DMC-FZ30 Digital Camera
Apr 11, 2009 | Samsung Digimax D53 Digital Camera
Apr 03, 2009 | Sanyo Digital Cameras
138 people viewed this question
Usually answered in minutes!