Question about Jamo Speakers & Subwoofers

Open Question

Jamo subwoofer SW 410 E not powering up

I have a Jamo SW 410e  Subwoofer and it is not powering up
I've checked the fuse and its intact.
What could be wrong and do I need to replace this subwoofer ? 
Any help or hints would be appreciated

Thanks in advance.
Amar Thiara

Posted by on

1 Suggested Answer

  • 2272 Answers

SOURCE: I have a Jamo SW-410E

The unit has to be opened and checked for blown or bulged capacitor.If that is all ok then yes the transformer is to be replaced.The other possibility is blown AMP .It has to be checked with meter and confirmed.

Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Sep 16, 2010

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


1 Points

Related Questions:

1 Answer

Jamo sub 250

Internal power? Check fuses. No fuses? Disassemble and check Power supply if it is internal. If it is external, check power supply with meter.;.

Apr 30, 2013 | Jamo SUB 250 Subwoofer

1 Answer

Please help! Jamo SUB 300 subwoofer still blows (0.8A) fuses after replacing a faulty thermistor, despite a high ohms reading directly across AC mains terminals on the board. What is causing the fuse to...

i have a jamo 250 sub.the blue light is working.when i connect the jack to the left line IN according to the manual it makes a sound as well.but seems not it related to the fuse????i know the fuse box.but i dont know how to remove the fuse to check.pls help me receiver is onkyo tx-sr 608

thank you


Jan 08, 2011 | Jamo SUB300BA SUB 300 Powered Subwoofer...

1 Answer

My jamo sub 200 & pioneer vsx517 receiver is not working properly

What do you mean that it sometimes doesn't work? It doesn't power on automatically?
Check settings of your receiver - if it has subwoofer output enables and if low frequencies from all channels are directed also to the SUB. By default only the LFE channel (.1) of 5.1 signal input is fed to the subwoofer. So Sub will work in this case only when you listen to 5.1 signal (DVD movie for example), but for radio or stereo music, only front speakers are used. By configuring this bass redirect, you can use subwoofer for all signal types.

Feb 08, 2010 | Jamo SUB 200 Subwoofer

1 Answer

Cant connect jamo sub 250 to marantz SR4001... how do i do it? any suggestions?

Use the PRE-OUT SW (subwoofer) output and connect it to the left RCA socket of your subwoofer.

Sep 27, 2009 | Jamo SUB 250 Subwoofer

1 Answer

Sound faliure

If the subwoofer has its own power cord seperate from the rest of the audio system, the internal amplifier could be fried or u have a loose connection inside the box

Mar 29, 2009 | Jamo SUB300BA SUB 300 Powered Subwoofer...

1 Answer

Jamo Sub300. No power. No lights

Well it would void the warrantee, but you can take the back panel off and the power supply will only have two leads (3 if grounded) in from the plug, and out to the crossover. It sounds as if you are correct that the power supply is bad.


Jan 05, 2009 | Jamo SUB300BA SUB 300 Powered Subwoofer...

2 Answers

I have no amp for jamo 1060 sub

Dual Voice-Coil
The unique Dual Voice-Coil design allows both left and right channel sound from just one speaker. Simply hook up both the left and the right channels to the special terminals on the speaker. Hook up one channel only, if the speaker is to be used in a conventional stereo set-up.
I found this on jamo site hope that will help you

Mar 15, 2008 | Jamo 1060 SW Speaker

Not finding what you are looking for?
Speakers & Subwoofers Logo

Related Topics:

772 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jamo Speakers & Subwoofers Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5327 Answers


Level 2 Expert

152 Answers

Robert Rankin

Level 2 Expert

338 Answers

Are you a Jamo Speaker and Subwoofer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides