Question about Sony VPL-ES3 Multimedia Projector
Posted by Anonymous on
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
According to the manual, you need access to the RESET button, the left and right arrows and the ENTER button to clear the counter. Press the following in order for less than 5 seconds each:
The above sequence should clear the counter.
Posted on Apr 09, 2009
After replacing lamp, connect projector AC power cord and turn the projector in standby mode.
Press following keys on control panel for less then 5 seconds each..
RESET, <==, ==>, ENTER.
That will reset lamp timer in projector.
Posted on Jun 01, 2009
These instructions are for a Sony Cineza VPL HS3, but may be the same for the HS2
1st thing to check - is the cover properly/completely closed - this can stop the projector from working.
Connect the power and set the projector to standby mode.
Press these buttons on the remote control in this order, for less than 5 seconds each.
Reset - Left Arrow - Right Arrow - Enter
This is required, to reset the lamp timer.
Also, something I found interesting from the internet - lamp life isn't when the bulb dies, but when a bulb has lost 10% of its brightness - so you might well be able to reset the timer and get much more use from the bulb - the image just wont be as bright.
Posted on Feb 06, 2010
Tips for a great answer:
Nov 21, 2014 | Sony Office Equipment & Supplies
Jun 29, 2014 | Sony Replacement Lamp for VPL PX21, VPL...
Mar 22, 2011 | Sony VPL-EX3 LCD Projector
Aug 08, 2010 | Sony VPL CS6 Multimedia Projector
Nov 26, 2009 | Sony VPL-ES3 Multimedia Projector
Apr 09, 2009 | Sony VPL-ES2 LCD Projector
Apr 27, 2014 | Sony VPL-ES3 Multimedia Projector
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: