Question about KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Open Question

Clean light flashing on a Kitchenaid KUDE40Fxsp5

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
aborcass
  • 2651 Answers

SOURCE: Lights flashing on clean. Program does not take.

you can open the lowe racess panel of d/w and you find a techsheet/ trouble shooter, in ther they will explain how to reset a clean light blinkin 7 times.. you can try pushing the "sani-rinse"---"heated dry"--- "sani-rinse" --- "heated dry"... toggling these buttons will triggor a test mode, youl know your in it for all the lights will light, close the door and wait 30 secs or so, the reopen door and cancel cycle, after it runs for 2min it will be ready fro you to start using again.. of the clean light issue returns, id recommned calling for service

Posted on Jan 10, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset control board on kitchenaid dishwasher


Check to see if there is a manual behind the bottom panel. It should tell you what that error code is. It may be the heater is not working or some other issue. You will have to repair the problem before this will stop.

Oct 02, 2014 | KitchenAid Dishwashers

1 Answer

Clean light is flashing


please read your instruction manual and go the section troubleshooting
press down the overfill protection float on the floor of the dishwasher's tub in the right, front corner near the door. If it cannot move up and down freely, the "clean" light will flash.


6_22_2012_9_37_57_am.gif6_22_2012_9_38_29_am.gif

Jun 21, 2012 | KitchenAid KUDS30IVBL Builtin Dishwasher

1 Answer

Clean light on kitchenaid kcm112 won't go off


I found that the following clears the "clean" word that is flashing:

  1. Hold MODE and the + button for about 5 seconds.
  2. After the coffeemaker chimes 2 times, release the buttons.

Hopefully, the clean message will go off.

As an aside, the warmer plate is so awful looking. I am replacing this coffee maker (KM222) with another (and cheaper) one.

Jun 16, 2012 | KitchenAid KCM Coffee Makers & Espresso...

1 Answer

My Kitchenaid dishwasher model KUDS01FLSS6 stopped working. It won't run and the clean light is flashing at me.


you need to clean your dishwasher, leftover soap, food particles, usually cause sensors to be dirty hence it thinks there's some problem with your machine.

Feb 02, 2011 | KitchenAid 24 in. KUDS01FLSS Built-In...

1 Answer

Clean light blinks 7 times and will not start it is a STATUS KITCHENAID


Hello & Welcome to FixYa


Flashing clean light is reset by pressing two buttons in sequence 3-4 times, to reset your kenmore press these buttons in sequence:


High temp wash-heated dry-high temp wash-heated dry


Please get back to me if you have any other questions.


Kevin

Dec 10, 2010 | KitchenAid 24 in. KUDP01IL - Multiple...

1 Answer

Clean light keeps flashing


Hi,

This is due to a fault with the water heating properly. See the attached link to reset the control and reasons why this failure occurred.

Flashing Clean Light

May 30, 2010 | KitchenAid KUDS01FKSS Dishwasher

1 Answer

Clean button will just flash need to know how to reset


Hi,

The clean light is flashing due to a failure in heating the water properly. Follow the link below for instructions on resetting the control and information on what may have caused the failure. Let me know if it was helpful.

Clean light flashing

May 30, 2010 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

Clean light won't go off and cannot start another


you need to pull the dishwasher out and check your heating element.
to remove code hit heated dry and normal wash and toggle till all the lights light up and then hit cancel this should clear your code.
there is a problem with the heater or the heater curcuit
let me know how it goes

Jan 13, 2010 | KitchenAid 24 in. KUDI02IRBS Stainless...

1 Answer

Whirlpool quiet partner III. Clean light keeps flashing clean.


Had the same problem. Press the sani-rinse and heated dry button back and forth and it should reset.

Aug 29, 2009 | KitchenAid 24 in. KUDI02IR Built-in...

1 Answer

Lights flashing on clean. Program does not take.


you can open the lowe racess panel of d/w and you find a techsheet/ trouble shooter, in ther they will explain how to reset a clean light blinkin 7 times.. you can try pushing the "sani-rinse"---"heated dry"--- "sani-rinse" --- "heated dry"... toggling these buttons will triggor a test mode, youl know your in it for all the lights will light, close the door and wait 30 secs or so, the reopen door and cancel cycle, after it runs for 2min it will be ready fro you to start using again.. of the clean light issue returns, id recommned calling for service

Jan 07, 2009 | KitchenAid 24 in. KUDS01FLBL Built-in...

Not finding what you are looking for?
KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Mike

Level 3 Expert

4340 Answers

Cindy Wells

Level 3 Expert

5187 Answers

Are you a KitchenAid Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...