Question about LG WM2487H Front Load Washer

Open Question

Lg washing machine wm2487H*M won't drain

Black rubber front drain hose is clogged, the washer keeps filling with water during the rinse cycle.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 351 Answers

SOURCE: 7 kg intellowasher noise when in wash cycle

if its a direct drive remove the rotor and see if theres a loose magnet etc,hope this helps

Posted on Mar 04, 2008

IFIXALL
  • 868 Answers

SOURCE: LG Top loader not draining water to rinse and spin

YOU NEED TO CHECK THE WATER PUMP,SO LAY THE MACHINE ALL THE WAY DOWN ON ITS FRONT,NOW YOU HAVE ACCESS TO THE PUMP.Remove any debris that may be lodged inside of it.

Posted on Jun 09, 2008

MNTECH
  • 1543 Answers

SOURCE: lg wm2277h has low water level

The water level is very low on front load machines. (Below the bottom of the door) While the washer is running, push and hold the "spin speed" and "soil level" buttons at the time. Display should be between 230 and 255.(normal) If you do this while the machine is filling, you will see the numbers change. This machine only uses about 12 gallons of water for an entire cycle, vs. about 45 for some top loading machines. THIS IS NORMAL ! The machine will adjust the amount of water based on the type and volume of clothes in your washer. On a large load, you will see wet clothes, but no water sloshing around. PS. Because the machine uses so little water, make sure you use only one tablespoon of HE detergent (and only one teaspoon of fabric softner if you use it). This is very important.

If this info was helpful, please rate it as a "FixYa". Thanks.

Posted on Oct 01, 2008

  • 99 Answers

SOURCE: LG Tromm Model # WM2075CW doesn't drain - water everywhere!

This is joyce
I hope you have not been waiting long for this answer, go to the website lg.com dowload your document on your washer put in your model # first and then it will give you all the info you need on that machine even trouble shoot it and codes. I hope this helps.
thanks,
joyce

Posted on Feb 07, 2009

  • 105 Answers

SOURCE: LG WM2487 front load washer spews suds out of port on rear.

You are likely using too much detergent or the detergent is not high-efficiency detergent. Change detergents and/or lower amount and this problem should go away.

The water port on the back allows air inside the tub to escape. However, if the wrong type or quantity of detergent are used, excess suds will flow from this port.

Posted on Aug 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not getting enough water during rinse cycle


In the rinse cycle it will use cold only to rinse with.
You need to see how fast the water is going into the machine on rinse
Things that can effect slow fill, low water pressure, Faulty cold valve
water hose & valve filters clogged, Kinked hose

Feb 21, 2012 | Fisher and Paykel IWL12 Top Load Washer

1 Answer

Spinning cycle


Keeping in mind that the soap & bleach gets dispensed into your wash on the second to last rinse cycle and that most all rinse cycles are in cold water. Is your cold water valve screen plugged causing your washer to rinse poorly? Are you using the HE detergent? If not maybe the washer is sudsing up to much and having a hard time rinsing all the suds and bleach out and leaving the clothes soapy.

Fill the washer up with no clothes in it on a cold/cold wash setting does it take a long time to fill the washer up? Also when it is full and agitating is there suds in the washer?

Last suggestion is if the drain is hose is a lot higher than the top of the washer it might have a hard time draining out all of the soap water before the next load

Mar 23, 2008 | LG WM-2277HW Front Load Washer

2 Answers

My LG Front Load washer starts to wash, then when it tries to drain, it stops and shows error code OE. I checked back drain hose and they are not kinked. I removed front filter in bottome left and water...


Hi dear.OE code meaning on Lg washer's"machine unable to drain in 10minutes". You can make a little test.Please remove the filter & pour some water in side drum ,watch for water coming out of filter.If it's slow, tub to pump hose clogged.(there must be some sort of fluff or coin clogging hose)if it's not slow,waters comes out freely, run machine on drain cycle & check the pump motor is it running smoothly?If not change the pump.I hope that helps.Thanks.

Aug 23, 2010 | LG WM2487H Front Load Washer

3 Answers

Have the Indesit Moon washing machine and it will not finnish the wash cycle and go into spin mode. Is there anything I can do? Thanks


A washing machine won't spin if the water can't drain. Check hoses for any kinks or clogs that may prevent the water from draining. If a hose has kinks, try to straighten out the kinked hose. If it can't be straighten sufficiently, replace the hose. If hoses are not kinked, check for clogged hoses. This can be done by using the screwdrivers to remove the hoses and looking for clogs or running a water hose through the clogged hose to remove the clog. Use the rags and bucket to clean up the water that comes out of the hoses when they are disconnected. Once the clog is cleared, put the drain hose back into place. The washer should drain and spin now if a clogged or kinked hose was the problem.

If the washer still won't drain or spin, check to see if the lid is not closing all the way or if the lid switch is not clicking into place. Close the lid and make sure that it closes all the way down. When the lid closes, the lid switch should click. If there is no clicking sound, then the switch may need to be replaced.

Another possibility for a washing machine to not spin or drain is the pump. With the back panel still off the washer, check the pump with the voltmeter to ensure that the pump is getting power.

Please donot forget to rate and accept my answer...

Apr 14, 2010 | Indesit W 123 Front Load Washer

1 Answer

Washer stops during rinse cycle and "OE" code shows up. we've cleaned filter and keep draining drain hose. is there anything else to do or check?


You may have to inspect the entire drain system back to the pump, it may be partially clogged. When the unit drains it should drain a substantial amount of water. View the drain discharge, if it appears the discharge rate is not what it used to be, inspect the drain system

Nov 12, 2009 | LG WM-2277HW Front Load Washer

1 Answer

Wash cycle not filling with water


Does the washed show an error?

Check all hoses in back. Remove them from washer and ensure water is coming from lines (drain into bucket).

Unplug washer for several minutes, then try again.

May 02, 2009 | LG WM2487H Front Load Washer

2 Answers

Whirlpool front loader WF665/1 spilling water during cycle. Water is leaking from where the powder is deposited into the machine during the filling stage of the washing cycle. The machine will continue its...


that means that the water is leaking from the hows at the back of the detergent drawer.

This is not a difficult fix, however the washing machine must be taken apart to access the detergent hose and find the leak.

Always better to call a technician.

Nov 16, 2008 | LG WM2487H Front Load Washer

1 Answer

Code OE water is not being drained out


You may have a broken or plugged drain pump and needs to be diagnosed by a qualified LG technician.

Jun 26, 2008 | LG WM2277H Stainless Steel Front Load...

1 Answer

GE Washer won't drain or spin


this is something that you can fix even if your not a technical person . first you have to open the washing machine front panel or back panel , second , follow the DRAIN HOSE to where its connected to a little motor, disconnect the DRAIN HOSE , take the LITTLE MOTOR out and clean it out , it could be clogged.
it happen once and find out the person put the BATH RUG SET
to wash , the rug was so old that pieces of a rubber underneath the rugs clogged the drain , so there was no rinse and no spin.
try it , I hope it helps.

Apr 16, 2008 | GE WBSR3140DW Top Load Washer

Not finding what you are looking for?
LG WM2487H Front Load Washer Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...