Windows 8.1 drivers needed for PDP Afterglow AP.2 gamepad

It's quite possible that the controller is faulty...Xbox One controllers are actually having the same issue as well. Normally speaking you can either contact your manufacturer about an inquiry to get it sent in for repair, or you'll have to go out and get a new one. If they don't have a fix for you, that's one of your final options.

The default passkey is 0000

Hope this works.

Alternating red and white LED colors indicates that it is not detecting an active bluetooth connection. Use the PS3 bluetooth settings to find and reconnect the signal.

Hello! Sorry if this isnt the answer you want but i have found that there isnt really a way to turn them off, they just go inactive after a while, BUT! If you plug it in after youre done and let the charge light come on and then unplug it, it turns off :D this might not be true for yours but i hope it helps

RHTH FHJFH HFHFH

It can, because it's aftermarket and made the cheapest way possible.

Likely faulty wiring, which is common in aftermarket accessories.

Have you checked your headset setting on the ps3?

The pass key is the same as your ps3 and if that doesnt work, then it is 0000

Comes in the box.