Question about ZT Group Cisnet PC Desktop

1 Answer

How to access boot option my boot option is disabled

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • ZT Group Master
  • 27,725 Answers

Windows operating systems support a variety of boot options on the Windows Advanced Options Menu that allow you boot your computer based on your need.

They support boot options such as Safe Mode, which is generally best for troubleshooting and virus removals; or the Safe Mode with Networking, which allows to use an Internet connection while troubleshooting system problems.

Within seconds, you can access the boot menu and select the option that works well for the task you want to accomplish.

Shut down all currently running programs and restart your computer.

Press "F8" repeatedly before the Windows icon shows up on your screen.
This will bring you to the "Windows Advance Options Menu."

Scroll down and select the boot option you want.
Press "Enter."You can select from "Safe Mode" "Safe Mode with Networking" or your regular booting option.

Choose the boot option based on your need.
For troubleshooting, it is advisable to select "Safe Mode" because only a certain amount of drivers and resources run allowing you to resolve issues

Posted on Feb 17, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Now this is what i see on my gateway in the utility setup menu under the option boot it sais or gives option network boot mba v12.2.2 slot 0300 wondering if this will help me or if i should push this ??


Hi Tammy,

I have never liked boot/startup menus for windows. I use to use them in DOS modes way back in the day but windows today, my opinion, does not need one. The only time would be if the computer is host to two different OS's.

My opinion is to not use it at all. I have my HP laptop's connected to my network by using the router and windows hooking it up.

Did the gateway come with the MBA installed?

Is there any option that allows you to disable the MBA menu?
[do not disable it until you have fully looked into the situation that doing that will not stop you from accessing your computer]

HTH, post back with what you find out.

Wayne

Nov 02, 2013 | Gateway Computers & Internet

1 Answer

Dell Inspiron 1721,Disabled All boot options in Bios now cant boot


Access BIOS by pressing F2 during startup. Enable boot devices, make sure boot device order is correct.

Oct 09, 2013 | Dell Computers & Internet

1 Answer

Disable intergerated video card to allow for pci card to function


You need to access the BIOS to disable the on-board video. Do you have Windows 7 installed or have you upgraded to Windows 8?

For Windows 7, turn off the computer and then turn it back on. After pressing your on switch press Delete repeatedly to access the BIOS. (Some computers use Tab or another key, you should see a screen indicating the correct key.) If Windows starts to load, try again. (I usually have to try 3-4 times to press the key at the correct time following the POST.)

For Windows 8, the boot sequence can be too fast to hit the key. Use the Advanced Restart option. Access the Charms menu and choose Settings > General > Advanced Startup. Alternatively, Charms > Settings > Power > press Shift and then select Restart. This should give you a Boot options menu and you'll be able to access the BIOS from that.

On my machine, I need the Advanced BIOS and then the System Agent Configuration. Then I select Initiate Graphics Adapter. Your BIOS may be slightly different. Go through your VGA graphics for disabling the on-board graphics and enabling the correct PCI/PCI-e graphics option.

I hope this helps.

Cindy Wells
(make sure that your power supply will support the graphics card.)

Mar 17, 2013 | eMachines ET1331G07w (884483025329) PC...

1 Answer

I have error code 0xc0000034 file:\BCD on my brand new Asus


Had the same problem with an ASUS. I entered BIOS (press ESC key as instructed) then disabled "fast boot" under BOOT tab section. You can also try pressing F9 key during start up to access other options.

Dec 29, 2012 | Computers & Internet

1 Answer

How to disable the f12 option


open your bios, usually f2 or f8, look for boot manager or boot order, then change the boot order so cdrom or disk bay or however your bios refers to your cd drive is first, not sure what you mean by disabling the f12 option.....but changing boot order should fix your problem

Dec 27, 2012 | HP Compaq nc6220 Notebook

1 Answer

I'm trying to help a friend install


After "Fast Boot" has been enabled, you cannot access the BIOS setup during power on . The machine will bypass "Press F2 to access Setup Utiltiy and F12 for Boot Menu" prompt.
This is a bigger issue if the hard drive crashes and access to Windows is not possible OR

Fast Boot can be enabled or disabled in the BIOS setup, or in HW Setup under Windows.
If you have Fast Boot enabled and you want to get into the BIOS setup. Hold down the F2 key, then power on. That will get you into the BIOS setup Utility.
You can disable the Fast Boot Option here. You will need to disable Fast Boot if you want to use the F12 / Boot menu.

Aug 26, 2011 | Toshiba Computers & Internet

1 Answer

Hi, excuse my poor english. How can I disable onboard video on a Lenovo M55e 9632AE2? Thanks in advance. Markus Brandl


There are two ways to disable the onboard video:

First Option:
When the machine boots up, watch for instructions such as "Press to enter setup, bios, configuration, ect." Within the BIOS setup should be an option to disable to onboard video. This can usually be found within an Integrated Chipset Features section or a Video section depending on your BIOS. Be careful though, messing with settings that you don't understand can affect your computer negatively.

Second Option:
Assuming you're disabling the onboard video because you have installed a video card, access the device manager by right-clicking "My Computer" and click Manage. Select the Device Manager on the navigation pane on the left, then expand the Display Adapters section. Right-click on your onboard graphics adapter and then click Disable and you're done!

May 25, 2011 | Lenovo ThinkCentre M55e 9632 PC Desktop

1 Answer

Disable SATA in BIOS, well but there is no option in Bios to disable or enable SATA. Lately HP DV2000 comes with bios without this option (DV2000 - DV2680ee, I lost a lot of money and time with this...


You should not need to disable SATA as it is a way to interface with the hard drive. In the BIOS you can disable a hard drive to boot within the boot options.

May 06, 2011 | Computers & Internet

1 Answer

Following instructions for factory settings on asus notebook but when i hit f9 on start up nothing happens please help


ASUS netbooks have a Boot Booster which renders all activity obsolete, you need to disable the boot booster first.

First you need to access the BIOS/Setup Utility, on an ASUS machine/Motherboard you need to hit "Del" or "F2" not F9 at this stage.

Once in the Setup Utility, using your arrow keys navigate to the Boot options page. Using down arrow key navigate to Boot Booster option and hit Enter to disable. Once the option is disabled navigate to the last tab Exit, and using down arrow key to navigate to Exit and Save Changes.

Your laptop will then reboot and as soon as it does you may start to hit "F9" which will start the Factory Settings utility. You can then follow the on screen instructions to continue wit the resetting of your machine.

Jan 13, 2011 | ASUS Eee PC 1000HE Netbook

3 Answers

I can;t boot my laptop compaq Evo N610c from cd-rom drive


Disable the SATA option in BIOS settings then it automaticaly takes the CD ROM

Mar 04, 2009 | Compaq Evo N610C Notebook

Not finding what you are looking for?
ZT Group Cisnet  PC Desktop Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top ZT Group Computers & Internet Experts

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

Nerd Rage
Nerd Rage

Level 2 Expert

36 Answers

didi2005

Level 3 Expert

628 Answers

Are you a ZT Group Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...