Question about Sewing Machines

1 Answer

I have acquired a necchi automatic supernova. I want to know how to install a foot pedal - it never came with one. It did come with a sewing motor controller (dark brown/black block with two cables leading from it. It's cables are bent at their ends indicating they were once connected to the connection points adjacent to the main power connection points (next to the main motor).Does this controller have any association to a foot pedal - what does it do?Btw, the machine light works and the operating parts of the machine are oiled and work smoothly without grit etc...Any help will be greatly appreciated

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 276 Answers

Foot pedal is a HD voltage regulator that controls the motor speed by simply increasing/decreasing voltage supply. e.g. if the two wires to the foot pedal were connected the motor would get full voltage and run at max speed. most foot pedals can be adapted for your machine

Posted on Feb 17, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Old sewing console with new machine

I have a very old Necchi machine and I need a new belt for it.

Posted on Apr 11, 2008

  • 166 Answers

SOURCE: my machine has power, but foot pedal only makes needle go slowly

sounds like the contact in the foot peddle has failed try a new peddle

Posted on Jan 02, 2009

  • 980 Answers

SOURCE: singer 522 starts sewing at speed without the

Undo the foot control and take out the small square suppressor and throw it away, you don't need it anymore.

Posted on Dec 18, 2009

  • 1 Answer

SOURCE: My Viking 5710 starts to sew without any pressure on foot pedal

Mine does the exact same thing. I think the problem might lie in the cord to the foot pedal. The cord packs into the foot pedal for storage, which forces the cord to to remain bent during storage. I believe the wires in mind became damaged and broken so I took it apart and reconnected the wires at the spot where the connector meets with the wires. But I still don't leave it plugged in if I'm not using it, it could be a fire hazard.

Posted on Mar 24, 2010

SOURCE: foot pedal not working

yes, it is possible that the foot pedal can go out,, it would be a good
idea to have the foot pedal checked at a repair shop to see for
sure

Posted on Aug 28, 2012

Testimonial: "I went to sewing machine store today and the pedal checked out as dying, so ordered a new one. Thx again!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where to I connect the foot controller on this necchi bu mira sewing machine??? Cannot find where it connects anywhere.


is that a belt driven machine if so the foot pedal controls the motor hanging below the machine

Jul 20, 2015 | Necchi Sewing Machines

1 Answer

Necchi supernova manual


Most sewing machines can use a double needle, the one with the single mounting shank and it turns into two needles.
MAKE sure you have Zig Zag needle plate installed to accomodate the double needle.
Turn hand wheel slowly to test then use thread and fabric and turn flywheel by hand to test sew.

Jul 19, 2014 | Necchi Sewing Machines

1 Answer

Necchi supernova julia power problem


sounds like a sew-tric plug an motor if so under the motor's electrical connection cover there is a wiring diagram moulded onto it

Feb 24, 2014 | Necchi Sewing Machines

1 Answer

A foot control that works with necchi Julia


call or email these sites and ask them
sewvacdoctor.com
a1sewingmachines.com

Jan 26, 2013 | Sewing Machines

3 Answers

My machine has power, but foot pedal only makes needle go slowly


sounds like the contact in the foot peddle has failed try a new peddle

Jan 02, 2009 | Necchi 3101 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...