Question about OKI C5100n Laser Printer

1 Answer

Paper jam 580

No paper found which sensor do i need to check

Posted by on

  • TC12 Nov 03, 2007

    391:Paper Jam

    There is not any paper obstructing the copier path. After I open the cover I can copy one sheet.



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

You know what I would try, look in the fuser unit and see if any paper ripped off and got stuck in there. Wait until it's cooled down, but usually if you have to pull paper of of there, little pieces can get caught in there. Also, you may have a full sheet in there, I've had people leave and entire sheet in the fuser all scrunched up and the machine print fine for another 100 prints and then have an error and the paper coming out looking like it almost caught fire.

That's where I would look first if there isn't anything in the print path under the toners, etc.

Posted on Nov 28, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

How do I fix my Utax CD 1315 every time it makes a copy J40 appears in the window and won't make anymore copies

J40 is a paper jam might be a pickup roller check complete paper path might also be a hung exit sensor

Sep 16, 2016 | Office Equipment & Supplies

2 Answers

HP 1010 , paper jam near fuser assembly.

Remove left,right,top & back cover, #check paper sensor flag & flag spring, found any dis location? correct it.Most of the cases spring dis location observed (see the snap shot for easy recognition)#clean fuser paper out sensor as well as check sensor flag.#check fuser teflon sleeve.


Mar 22, 2012 | HP LaserJet 1010 Printer

1 Answer

Says I have a paper jam but don't

Remove fuser assembly mounted on the top, check paper input & out put sensors clean or blow air on it to clean the dust, if found any sensor flag dis located, locate it properly, if found damaged replace fuser unit..

Feb 01, 2012 | HP Color LaserJet 3500 Printer

1 Answer

,The error message says that there is a carriage jam. We have found now paper jammed anywhere.

This error message is displayed by the printer when paper is jammed in one or more locations. In such a case, users are recommended to remove the jammed paper from the specified location. The entire paper path must be checked for any pieces of paper. To stop the message, open and close the top most cover of the printer. Lastly, verify the flags and the sensors. If the problem persists, the cause of the error message could be a broken sensor or sensor lever.

Mar 31, 2011 | HP OfficeJet 7310 All-In-One InkJet...

2 Answers

Top cover paper jam in laserjet 4345mfp

check the top cover, all the trays of the printer. sometimes there are small particles of paper that is put in the trays or inside the machine.

Feb 25, 2010 | HP LaserJet M4345 MultiFunction Printer

1 Answer

LexMark x3430 printer

Here is a guide of all possible paper jam locations on the X340 printer.
If still no paper is found on any of those places then the printer has a faulty sensor. Depending on the paper jam numeric error is the sensor that may be failing.

Feb 12, 2010 | Lexmark X340n All-In-One Laser Printer

1 Answer

Paper Jam but no papaer found Canon Image Class D860

Have you checked that the paper path is clean and free of paper fragments which sometimes get jammed in the sensors? Try blowing them with a compressed air bottle.

Aug 24, 2009 | Canon imageCLASS D860 All-In-One Laser...

1 Answer


paper jam 2 is your fuser sensor error,need fuser replaced.

Jul 01, 2009 | Samsung SCX-4100 All-In-One Laser Printer

Not finding what you are looking for?
OKI C5100n Laser Printer Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top OKI Office Equipment & Supplies Experts


Level 1 Expert

13 Answers

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Are you an OKI Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides