Question about Coleman Signature 6 Instant Tent

Open Question

Coleman instant tent poles twisted and no longer able to erect tent

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

c7121
  • 160 Answers

SOURCE: Centre pole is failing to hold tent up in any real wind

TRY DRILLING A SMALL HOLE ON THE INNER POLE SLIGHTLY SMALLER THAN THE DIAMETER OF THE SCREW. U WILL WANT TO DRILL SMALL HOELS EVERY FEW INCHES(CM) SO THAT U WILL BE ABLE TO SET THE POLE AT VARIOUS HEIGHTS IN THE FUTURE.

Posted on Jan 14, 2010

  • 1 Answer

SOURCE: coleman salt lake tent 9 man no instructions please help?

the instructions are useless anyway. you put the red poles through the 2 side bedrooms. the black rods and the black poles with the bends in join together and go diagonally through the middle of the tent. the yellow rods join together with the black poles with the yellow tape round the ends and u fit these from the inside of the front and back entrance then when the tent is up you just hook the bedrooms in. hope this was usefull

Posted on Oct 23, 2010

vpsoccer
  • 269 Answers

SOURCE: I have a Coleman Savannah 6 tent but no

1. Usually you can go to the website of the manufacturer and get a sheet of instructions, or you can get them from a dealer.

2. Try it. You might find that it is obvious once you get it spread out. I bought one with no instructions once, and there was only one step that took a while to figure out.

3. Try a friend or neighbour who is an experienced camper. They might be able to figure it out pretty quickly.

Posted on Jan 26, 2011

  • 1 Answer

SOURCE: I have a coleman Weathermaster

I have the same model number tent and have some broken connectors as well. I could not find any replacement parts any where local or online. I called Coleman's customer service number at 800-835-3278. The tent has been discontined but they had a few of the connectors "in the office" and shipped me three. Give them a call; they were extremely helpful. Coleman customer service is top notch in my book!

Posted on Mar 28, 2011

  • 1 Answer

SOURCE: we have recently been given

Hi Mark

This tent is a nightmare to get up, the poles are constantly splitting and you will need a football team if its windy. That said, the actual quality of the tent is brilliant if you can get it up in one piece. Email me if you pick this up.
markshirra@live.com
Cheers

Posted on May 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replacement Pole for Coleman Oasis Cabin Tent model 2000000583


Coleman may be contacted toll-free at 1-800-835-3278. Replacement parts are available from them.

Apr 01, 2014 | Coleman Outdoor Products Coleman Oasis 16...

1 Answer

Coleman Classic Tent. Needing instuctions


I had an original Classic which perhaps is slightly different to the recent models but they look the same. Fibreglass rods go through tunnels at each end of the roof. A two piece aluminium or stainless tube is forced between these two fibreglass rods to tension them into a curve. It takes a lot of pressure. On my tent there was a rounded bolt in the middle to make it easier to push down. When the roof is tensioned you use the two poles, one at each end, to erect the tent. Go round the base with pegs, there are no guy ropes. Had mine for over 20 years before it lost its waterproofing.

Jun 05, 2011 | Sport & Outdoor - Others

4 Answers

I have a Coleman Savannah 6 tent but no instructions. Does anyone have any instructions on how to erect this tent?


It does not come with instructions oddly.
However, start with the external frames and then hang the main inner tent onto it. Finaly drag the flysheet over at the end.
The middle legs sort of cross over towards each other and meet in the middle at the bottom - this is crucial!

Hope this helps.
Paul

Apr 11, 2010 | Coleman 10' X 10' Sundome Tent 9160K101

1 Answer

Cant setup my coleman montana 4 tent instructions in case flap are not good enough


Go to this site: http://www.meijer.com/catalog/product.jsp?productId=129522&parentCategoryId=221&categoryId=1082&subCategoryId=1312# : It has a video of how to erect and dismantle the Coleman 4 Tent.

Feb 02, 2010 | Coleman Montana Tent 6 Sleeps

1 Answer

We need help with setting up coleman 13x9 forrester tent


General tent setup instructions:
thread assembled poles through sleeves
connect one end of poles into tent corners
1 by 1 connect the other end of the pole, work front to back and the tent should assemble quite easy.

Oct 02, 2009 | Coleman 10' X 10' Sundome Tent 9160K101

2 Answers

How do u erect a lichfield challenger 5 tent ?


Peg out 2 back pegs of inner tent. Peg out 2 front then side pegs. Place smaller pointed pole through hole at bell end of inner tent from inside, longer pole through hole at front.Fit protective bases to each pole. Top pointed poles with separators. Assemble roof pole, put through loop and over separators. Throw outer tent over from bell end (needs 2 people) then carefully lead towards front til holes in roof match - back hole first. Fit rain hoods front and back. Peg outer tent from bell end first then back corners, front corners then sides. Place porch poles through holes at front of porch, zip door sides down with one person holding poles upright and taut and peg out door. Peg sides all along making sure they do not touch inner tent. Fix guy ropes.

Aug 06, 2009 | Sport & Outdoor - Others

1 Answer

Coleman salt lake tent 9 man no instructions please help?


the instructions are useless anyway. you put the red poles through the 2 side bedrooms. the black rods and the black poles with the bends in join together and go diagonally through the middle of the tent. the yellow rods join together with the black poles with the yellow tape round the ends and u fit these from the inside of the front and back entrance then when the tent is up you just hook the bedrooms in. hope this was usefull

May 23, 2009 | Coleman 10' X 10' Sundome Tent 9160K101

2 Answers

No Instructions


Peg out the "brown" ground sheet of the inner tent and hold it up like a standard ridge tent.
Put the two shorter upright poles on the inside of the compartment (with something under the feet to prevent damage to the ground sheet). Put the 40mm tubes on the spike that pokes through, and then put the ridge pole on the outside.
Everything should then hold in place while you put the fly sheet over the top with the 2 longer poles at the front.......

tip - line up the seam on the fly sheet with the front of the inner tent as you peg it out....
Good luck

Mar 21, 2009 | Sport & Outdoor - Others

1 Answer

Need an instruction booklet for Wild Country Blaxland 64283 Tent


If you go to www.coleman.com Use the product services link for product manuals. You can then choose tents. Or you can use this link:
http://www.coleman.com/coleman/images/pdf/2000000136.PDF

Dec 15, 2008 | Coleman 10' X 10' Sundome Tent 9160K101

Not finding what you are looking for?
Coleman Signature 6 Instant Tent Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Coleman Camping, Backpacking & Hiking Experts

Jim London
Jim London

Level 2 Expert

257 Answers

yobo007
yobo007

Level 3 Expert

507 Answers

Ted Maxwell

Level 3 Expert

3519 Answers

Are you a Coleman Camping, Backpacking and Hiking Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...