Question about InFocus ScreenPlay 5700 Multimedia Projector
A black line about six inches wide is projected across the whole width of the screen. The rest of the image is normal. Any solutions please?
The light tunnel has collapsed and part of it is blocking the image. find an infocus service center to have them fix it because they don't sell the part.
Posted on Aug 03, 2009
Tips for a great answer:
After turning on the projector, press "+" and "-" buttons on the control panel
simultaneously for 3 seconds and release the buttons when screen goes blank.
2 Press "+" and "-" buttons again to exit the diagnostic mode.
3While in Self-diagnostic mode, the screen will run a seven-color-cycle test as
Red--> Green--> Blue--> White--> Watchet Blue--> Dark Green--> Yellow.
Ensure that the colors of the test pattern are correct. Contact Dell if the colors are
not displayed correctly.
Mar 02, 2011 | InFocus LP 250 Multimedia Projector
Nov 29, 2010 | Optoma EP771 DLP Projector
Jun 16, 2010 | InFocus ScreenPlay 5700 Multimedia...
Jun 04, 2010 | InFocus IN72 Multimedia Projector
Mar 03, 2010 | InFocus ScreenPlay 5700 Multimedia...
Aug 14, 2009 | InFocus ScreenPlay 4805 Multimedia...
Jul 11, 2009 | InFocus ScreenPlay 5700 Multimedia...
May 25, 2009 | Dell 2400MP DLP Projector
Dec 29, 2008 | InFocus In2102 Projector
252 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: