Question about Sewing Machines

Open Question

Elna 715 how to thread - Sewing Machines

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

99rannellis
  • 8899 Answers

SOURCE: How do I thread an Elna 715

I searched for manuals online but found only items listed on "questionable" web sites. You may try checking with the local Elna store. Bring in your machine and ask them to show you how to thread it. They may be able to provide you with printed threading instructions.

Also, if you can find a manual for a model similar to your machine, frequently it can be used as a guide. Most machines thread the same way.

..

Posted on May 20, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you adjust the tension control on an Elna lotus SP


The tension dial is on the front of the machine right above the needle. The higher the number, the tighter the tension is applied to the top thread. HINT: When threading the top thread, ALWAYS RAISE the presser foot throughout the entire threading process. This allows the thread to seat completely in the tension disk. Tension is correct when the top and bobbin threads meet in the middle of the fabric.

Elna Lotus Instruction Booklet

Elna Lotus SP bobbin case repair Removing cotton jam from Elna Sewing...

Elna SP ST SU sewing machine repair tips (I use liquid Tri-Flow Synthetic Lube or silicone spray to loosen parts seized from old oil. Do NOT use WD-40, cooking oil, motor oil...)

Apr 29, 2017 | Elna Sewing Machines

1 Answer

How do i adjust the tension on elna 2003?


Not quite sure what you are asking. The upper tension is governed by the tension disk. Higher number is tighter, lower number is looser. Usually, the mid-range is a good place to start. Tension is correct when upper and bobbin threads meet in the middle of the fabric.

NOTE--ALWAYS RAISE the presser foot when threading so the thread will seat in the tension disk!

Understanding Thread Tension Threads

Sewing Lesson 10 How to Fix Tension on Your Sewing Machine

How to Adjust Sewing Machine Tension on Craftsy

Just FYI:
Why my Elna sewing machine is bad Or dont buy an Elna 2007

Dec 08, 2016 | Elna Sewing Machines

1 Answer

How do I thread an Elna 715


I searched for manuals online but found only items listed on "questionable" web sites. You may try checking with the local Elna store. Bring in your machine and ask them to show you how to thread it. They may be able to provide you with printed threading instructions.

Also, if you can find a manual for a model similar to your machine, frequently it can be used as a guide. Most machines thread the same way.

..

May 20, 2016 | Elna Sewing Machines

1 Answer

Where can I find a link to download a pdf manual for the Elna 715


Did you try this one?
Not sure it works, because I don't need a manual and they ask for an email.
I can't give any warranty and be careful not to press links or install programs

ELNA 715 Manuals

Jun 11, 2014 | Elna Sewing Machines

1 Answer

I am looking for a manual for an Elna 715 sewing machine


www.sewing-machine-manuals.com
I recently bought two manuals for older model elna's and very reasonable price also downloadable.

Mar 27, 2014 | Sewing Machines

1 Answer

Any manual for elna 1200 model?


I could only find one for the Elna 1010...http://www.scribd.com/doc/3714472/Elna-1010-Manual
Perhaps that and the youtube video "how to thread an old elna.." http://www.youtube.com/watch?v=xEn3dNeiTqs
will give you enough help to get you started.

Mar 24, 2012 | Elna Sewing Machines

1 Answer

On my elna supermatic 722010 sewing machine, the thread makes the bobbin pop out and the thread get tangled underneath. I have had it fixed twice, which is expensive. Should I just get rid of it and buy...


not unless you can find another swiss elna, like star series su. check bobbin in right way, holes on top to wind and load. you havent bought anothet type bobbin??? go to www.arizonaexpressionz.com and download a manual for supermatic. then read bobbin winding and threading carefully and rewinf bobbin and thread up again. make sure thread goes into tension spring all the way. bobbin should turn anticlockwise when yoou pull thread. also please brush clean bobbin holder area and check for any threads caught there. now a drop of quality clear machine oil in middle hole and gently run for 30secs to work in. do this every time you get your machine out. there are several oiling points shown in manual. oil them. these machines are quality but yours may need love tlc from a elna tech especially if it has not been serviced in a while. but a well maintained elna will out stitch a new plastic machine any day in my humble opinion. if you want to join yahoo group elna heirlooms, experts who service their own and share photos info manuals and love these vintage classics.

Jun 16, 2011 | Elna Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...