Question about Sentry Safe Fire-Safe Personal Safe
Posted by Anonymous on
You must call (800) 828-1438 for combination retreivals.
The following is for informational purposes only:
If you need your combination, you must send a notarized letter stating you are the owner of the safe. (Note: the owner's last name must be different from that of the notary public). For locations that require a raised notary seal, use a pencil to shade the seal to insure that it is visible.
The notarized letter needs to include:
Posted on May 20, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you know the combination:
1) Turn the dial to the left a few complete rounds, then stop on 1st number.
2) Turning the dial to the right, pass up the 2nd number once, then stop on it on the next round.
3) Turn the dial to the left directly to the 3rd number then stop.
The handle should open now.
Posted on Mar 18, 2009
I finally ignored the poorly-written instructions for programming a personal code and simply entered the factory code first and then pressed the prog/enter code button. The safe opened. The instructions tell you to push the prog/enter code first and then enter the factory code or personal code to open the safe. Wrong! Do it my way should this problem happen to you.
Posted on Mar 23, 2009
Being a master locksmith we see this problem all the time on the Sentry Safe F3300 What happens is this Sentry Safe has a waterproof seal that sticks the door shut to prevent watter damage. But in doing so makes it seem like it will not open. We suggest pushing down on the left rear corner to pop the front of the lid open
Posted on Aug 05, 2010
SOURCE: Sentry S3807 safe-cannot open
locksmiths agree on how to install sentury safe batteries
slide open the battery cover located just below the keypad.
Insert a paper clip or pen point into the small hole in the cover. Push in while sliding cover to the right. Disconnect and remove the battery holder. Insert the 4-batteries as indicated.
reconnect the connector and put back the battery holder. Slide the cover back in place.
How do I insert the batteries on my advanced electronic lock safe?
to install batteries, turn the electronic lock case to the right and remove.Insert four new batteries as indicated, replace the electronic lock case and turn to the left to reassemble.
Posted on Aug 09, 2010
Tips for a great answer:
Jan 16, 2016 | Sentry Fireproof Safe
Jan 05, 2016 | Sentry Safe Fire-Safe .8 Cubic Ft....
Feb 10, 2015 | Sentry Fireproof Safe
Aug 28, 2014 | Sentry Fireproof Safe
Apr 07, 2014 | Sentry Fireproof Safe
Oct 27, 2010 | Sentry Fireproof Safe
Nov 03, 2009 | Sentry Fireproof Safe
Oct 05, 2009 | Sentry Fireproof Safe
283 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: