Question about Computers & Internet

1 Answer

Can not change LAN interface IP "Gateway IP" for HG520b modem

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Is it true that Tony Romo and Jason Whitten are gay?

Posted on Feb 15, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 44 Answers

SOURCE: Wi Fi fine, ISP fine, no internet via LAN connection though.

Make sure your firewall is not blocking your ability to go to websites. I saw this the other day, somehow the users firewall was set to block all internet traffic out of the computer.

Posted on Jan 21, 2008

  • 1 Answer

SOURCE: port forwading

http://portforward.com/
this site may be of some assistance

Posted on Jun 19, 2008

dugiehowsa
  • 114 Answers

SOURCE: Cicso router 1841 not connecting to the internet

When using Public IP addresses on one interface, usually facing your ISP, and using Private IP addresses (AKA RFC 1918) on another interface, usually facing your LAN, one needs to utilize network address translation (NAT) in order to connect LAN computing resources to the Internet.
Cisco has a fantastic article on how to perform the necessary procedures on their web site.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a0080093f8e.shtml

Posted on Sep 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can not change LAN interface IP "Gateway IP" for HG520b modem


The IP is usually assigned by the ISP, if you want to change it, you might try a VPN.

Feb 15, 2014 | Computers & Internet

Tip

Show Routing Table button will open a chart displaying how data is routed...


Show Routing Table button will open a chart displaying how data is routed through your LAN. Use the example below on how to configure a static routing:

STATIC ROUTING:

192.168.2.2 192.168.1.2
ROUTER C ----------------- ROUTER B ----------------- ROUTER A--------------PUBLIC IP ADDRESS
192.168.3.1 192.168.2.1 192.168.1.1

ROUTER A: Gateway Mode ROUTER C: Router Mode

1STENTRY 1ST ENTRY
DESIP: 192.168.2.0 DES IP: 192.168.2.0
SM: 24 SM: 24
DG: 192.168.1.2 DG: 192.168.2.2
HOP COUNT: 2 HOP COUNT: 3
INTERFACE: LAN INTERFACE: WAN


2NDENTRY 2ND ENTRY
DESIP: 192.168.3.0 DES IP: 192.168.1.0
SM: 24 SM: 24
DG: 192.168.1.2 DG: 192.168.2.2
HOP COUNT: 3 HOP COUNT: 2
INTERFACE: LAN INTERFACE: WAN


*********************************************************************************************************************************************************

ROUTER B: Router Mode


1STENTRY
DESIP: 192.168.1.0 WAN IP: 192.168.1.2
SM: 24 SM: 24
DG: 192.168.1.2 DG: 192.168.1.1
HOP COUNT: 2 DNS: DNS of 1st router
INTERFACE: WAN


2NDENTRY
DESIP: 192.168.3.0
SM: 24
DG: 192.168.2.2
HOP COUNT: 2
INTERFACE: LAN


*********************************************************************************************************************************************************
1stRouter must be set on Gateway Mode
2ndRouter must be on Router Mode
Use Static Routing
Select Entry
Destination IP = IP Subnet of the 1st Router
Subnet Mask = Subnet Mask of the 1st Router
Default Gateway = Interface IP
Hop Count = 1 + n
Interface= Connection to the 1st Router

Hope this help everyone.

on Apr 22, 2010 | Computers & Internet

Tip

HOW TO CONFIGURE STATIC ROUTING ON LINKSYS ROUTER


Show Routing Table button will open a chart displaying how data is routed through your LAN. Use the example below on how to configure a static routing:

STATIC ROUTING:

192.168.2.2 192.168.1.2
ROUTER C ----------------- ROUTER B ----------------- ROUTER A--------------PUBLIC IP ADDRESS
192.168.3.1 192.168.2.1 192.168.1.1

ROUTER A: Gateway Mode ROUTER C: Router Mode

1STENTRY 1ST ENTRY
DESIP: 192.168.2.0 DES IP: 192.168.2.0
SM: 24 SM: 24
DG: 192.168.1.2 DG: 192.168.2.2
HOP COUNT: 2 HOP COUNT: 3
INTERFACE: LAN INTERFACE: WAN


2NDENTRY 2ND ENTRY
DESIP: 192.168.3.0 DES IP: 192.168.1.0
SM: 24 SM: 24
DG: 192.168.1.2 DG: 192.168.2.2
HOP COUNT: 3 HOP COUNT: 2
INTERFACE: LAN INTERFACE: WAN


*********************************************************************************************************************************************************

ROUTER B: Router Mode


1STENTRY
DESIP: 192.168.1.0 WAN IP: 192.168.1.2
SM: 24 SM: 24
DG: 192.168.1.2 DG: 192.168.1.1
HOP COUNT: 2 DNS: DNS of 1st router
INTERFACE: WAN


2NDENTRY
DESIP: 192.168.3.0
SM: 24
DG: 192.168.2.2
HOP COUNT: 2
INTERFACE: LAN


*********************************************************************************************************************************************************
1stRouter must be set on Gateway Mode
2ndRouter must be on Router Mode
Use Static Routing
Select Entry
Destination IP = IP Subnet of the 1st Router
Subnet Mask = Subnet Mask of the 1st Router
Default Gateway = Interface IP
Hop Count = 1 + n
Interface= Connection to the 1st Router

Hope this help everyone.

on Jan 26, 2010 | Linksys Wireless-G WRT54G Router

1 Answer

Need to allow a telnet session thru a speedstream 5660 modem/router having a public ip and allow it to connect to a private ip on the internal LAN. how do i accomplish this?


According to the user manual:
Page 16:

HTTP Web-browser Access

Most HTML browsers can be used, though Internet Explorer 4.0 or Netscape 4.0 are recommended. IE 2.0 and Netscape 2.0 and their predecessors are not supported. The HTML interface can be used to access the LAN (or WAN) IP address or it can be used with FTP to upload and download files to and from the router.



To log on to the modem via HTML:

1 Bring up your favorite web browser.

2 Enter the Ethernet IP address of the router (10.0.0.1 or Speedstream) in the "Location" or "Address" area where you enter web page addresses.

3 Refer to "HTML Web Interface" on page 20.


Page 20:

HTML Web Interface

The HTML interface for the router first displays a page showing the current configuration of the router. The first page also provides links to the following functions:

.

.

.

Advanced Setup

Leads to a more detailed interface with several links that allow more in-depth configuration of functions available on the router. This interface provides the following links:

Configuration Procedures

Status and Statistics

Command List




This is where the user manual ends. I would suggest clicking "Configuration Procedures" and find the section for configuring Network Address Translation (NAT).
In that section (if it exists), you'll want to provide the private IP address of the computer running the Telnet server and forward port 23 to this IP address.
If NAT capabilities do not exist, I would consider changing the router to Gateway mode (described in the user manual) and buying your own router to handle the NAT firewall.

Dec 29, 2010 | Efficient Networks SpeedStream 5660 Router

1 Answer

Connecting PSP to wifi


Change the primary DNS of your PSP to 4.2.2.1 and secondary dns to 4.2.2.2

Apr 25, 2009 | Linksys WRH54G Wireless Router

3 Answers

Setup range extender


Access pointe bağlanmak için öncelikle bilgisayara elle ip adresi vermek zorundasınız daha sonra cihazı ethernet yoluyla bağlayarak ayarlayabilirsiniz.Ancak modeme bağlarsanız ip adresini ayarlamak gerekmez.Kolay gelsin.Good By

Jul 18, 2008 | D-Link AirPlus G Wireless Range Extender...

1 Answer

My computer keeps telling me I do not have an internet connection when I connect my router. I can unplugg the router and plug it back into my dsl modem and the internet again works. why won't my router...


More info would be helpful, but I am assuming that you have a router device that is not the DSL Modem, maybe a linksys, or something? Most likely what is happening is that the DSL modem is assigning private IP addresses, like 192.168.1.x, and the router is obtaining that IP address on its WAN interface, but is also configured for the LAN at 192.168.1.x, which is the same subnet, so it cannot route packets to the internet properly, as both interfaces have the same network range. Can you give me more info? I can try to walk you thru step by step.
Step 1. Verify current IP address when internet connection is working. (Go to a command prompt and type ipconfig, press enter, and document what your IP address is, also document the gateway address and subnet mask)
Step 2. Connect to the router instead of the DSL modem, do the same thing, document your IP address, gateway, and subnet mask
Step 3. Compare the two, your IP may be different, and the gateway may even be different, but see if both are trying to use the same IP range.

If they are the same, or close (the first 3 octets(set of numbers) are the same) then you will need to configure the lan side of either your DSL modem, or the router to be on a different IP address.

To do this will vary depending on the model of your router, so if you respond in the next few hours, I will still be online, and will try to assist.

Apr 23, 2008 | Computers & Internet

1 Answer

Wi Fi fine, ISP fine, no internet via LAN connection though.


Make sure your firewall is not blocking your ability to go to websites. I saw this the other day, somehow the users firewall was set to block all internet traffic out of the computer.

Jan 21, 2008 | NetGear DG834G Router

1 Answer

No access to set up modem or router


you might have configured your lan settings wrongly.

If your modem was setup for DHCP then you configure your lan to receive IP address automatically, DNS automatically.

If DHCP is disabled on the modem, you have to USE static IP Address for your lan ip and default gateway should be your modem default ip.

the default IP for modem is usually 192.168.1.1
if DHCP is disabled on the modem the sys ip is 192.168.1.3

So Configure your LAN setting as follow and Type http://192.168.1.1 in the address url.

Lan Settings:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1

click ok.
and type the above url, press enter the modem will ask you for username and password.

Good Luck.

Dec 27, 2007 | D-Link DSL 300G+ (DSL-300G+) Modem

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...