Question about Office Equipment & Supplies
I have a lexmark C532N. which shows the error service print head error 114.02. its been happening for the past one week. i am unable to use this in anyway. can u help me in overcoming this problem?
You are correct, Below is that section from the manual. Before you follow this, i've found in the past that the cable connector is not seated properly on the rip board, so check this first.
If you require any of the instructions on replacing the printhead or board let me know.
Yellow Printhead Lost Hsync
Check for the correct installation of the all the cables to the RIP
Board assembly and to the Printhead assembly; J2, J3, and J4 on
the RIP Board. Go to "RIP Board" on page 5-11. If the cables are
connected correctly to the RIP Board and to the Printhead
assembly, replace the following FRU:
"RIP Board" on page 4-11 If this does not fix the problem replace:
Yellow Printhead Assembly - Go to "Printheads" on page 4-33.
Note: Whenever a printhead assembly is replaced, it is necessary
to perform the "Printhead Adjustments" on page 4-1.
Posted on Feb 15, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
this error is a scanner lost lock error and can be caused by the scanner or the logic board. if this error comes up immediately on power up the scanner motor is not initializing by percentages of failure the scanner is approximately 85% the logic board 15% i would change the scanner
Posted on Nov 28, 2009
This is a laser unit problem, probably being caused by the laser scanner motor being slow to spin up to speed, or having failed completely.
Replacement of the laser unit is the first thing to try here.
Posted on Apr 20, 2010
SOURCE: service 960 memory error- r
A 960 RAM MEMORY FAILURE message indicates a failure of the RAM MEMORY that is soldered onto the printer's main controller/system board.
If the printer is displaying a 960 memory error.
1. Power off the printer.
2. If you have any extra memory SIMMs or code SIMMs installed in the printer, remove them.
3. Power on the printer.
4. If the 960 error continues, the main controller/system board will probably need to be replaced.
5. If the 960 error does not return, try printing a few documents.
6. If these documents print correctly, the cause of the 960 memory error is probably one of the SIMMs you just removed.
To confirm this, do the following:
1. Turn off the printer and reinstall each SIMM one at a time.
2. After you install each memory card, power the printer back on and try printing. If the error returns as soon as you install a particular SIMM, that SIMM is probably the cause of the error message.
Posted on Nov 08, 2010
Tips for a great answer:
Dec 06, 2014 | Lexmark Impact S305 Wireless All-in-One...
Jul 17, 2011 | Office Equipment & Supplies
Feb 26, 2011 | Lexmark Prevail Pro705 Wireless All-In-One...
Jan 07, 2011 | Lexmark Office Equipment & Supplies
Dec 03, 2010 | Lexmark C532n Color Laser Printer
Jul 26, 2010 | Lexmark C532n Color Laser Printer
Apr 12, 2010 | Canon imagePROGRAF W8400 InkJet Printer
Sep 10, 2009 | HP Office Equipment & Supplies
Jun 16, 2009 | Lexmark E450dn Laser Printer
Apr 27, 2008 | Canon imagePROGRAF W8200 InkJet Printer
395 people viewed this question
Usually answered in minutes!