Question about LG 42LE5500 42 in. TV

1 Answer

Picture not displayed (Only LG is getting displayed)

Hi, My LGLE5500 tv has a problem, when we switch on the TV, we get the LG image and further we dont get to see any thing else. When we approached a LG service center he stated that its a problem with either mother board or with picture tube. Finally found that the problem is with picture tube and asked us to replace the same. He charged 22k indian value. Do let me know whether this is the right diagnosis or if he is charging to earn money. This doubt came in only because he is the only service provider in our hometown.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 28 Answers

Do you have the set's input selected to the connector you are feeding in the cable or other input? Most TV's have a component input (red/blu/grn RCA type plugs) and an HDMI1, perhaps two HDMI's. If you are not using one of these types then you aren't getting HD.

Posted on Feb 15, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 92 Answers

SOURCE: 42 inch LG Plasma TV - Lost picture

sounds like it may be a software upgrade

Posted on Oct 31, 2007

  • 15 Answers

SOURCE: 42 inch LG Plasma TV - Lost picture

ysus pcb that supplies voltage to the panel is faulty

Posted on Dec 15, 2007

  • 3 Answers

SOURCE: 42 inch LG Plasma TV - Lost picture

Our LG 50" plasma tv screen went black after a popping noise but still had sound, after great diliberations decided to take the back off and have a peek!
We unplugged the tv and tested the fuses (there were three we could see) one had blown, the one on the left as you look at the back of the tv it also has one above it. We wrote the code/seriel number down and took the fuse to the electrical wholesalers Maplin and bought a pack of 10 fuses for £1.29 replaced the fuse in the tv and everything now fine!!!!!!
Hope this might be of use to anyone whose lost the picture after a loud popping/snacking noise but still has sound.

Posted on Jan 17, 2008

  • 1 Answer

SOURCE: Sound but no image on my LG Plasma TV

Have sound but no imagen

Posted on Sep 30, 2008

  • 1 Answer

SOURCE: Issue with LG Plasma tv model # DU-42PX12X

Another "same probelm"

My set has encountered this magical 50/50 split screen and it seems to be quite a problem since I am not the only one researching this issue. LG was of no use because of course it is just out of warranty. Any solutions on fixing this or am I out of money in buying a new plasma?

Posted on Nov 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Lg 42" tv not displaying screen image


The t-con board controls the picture. To test it shine a flash light on the screen abd see if you can see an image when the TV is on. If you do then the T-con board is OK. Look at the back light ballast board (sometimes is part of the power supply board) If you see no movement or a dim picture with the flash light, then the T-con board is gone. You can get parts here: TV Parts Universal TV Stands DLP Chips ShopJimmy

Aug 11, 2016 | LG Televison & Video

1 Answer

LED screen comes on and goes black


LG LCD TV REPAIR - NO PICTURE SCREEN FIX REVIEW ...

? 5:29
https://www.youtube.com/watch?v=PWoz_-3OHIM
Jan 25, 2013 - Uploaded by Tampatec
Common LG LCD TV REPAIR - NO PICTURE OR BLACK SCREEN FIX ... I have a LG 42PM4700-UB plasma tv that justwent black. The red ... I had to keep turning on and off the TVseveral times for the screen to come back.

LCD & LED TV Repair - No Image & Blank Black Screen ...

? 5:56
https://www.youtube.com/watch?v=xUzCLgoSPGM
Sep 15, 2014 - Uploaded by ShopJimmy.com
LED & LCD TV How to Diagnose Symptom of No Image on theScreen CLICK ... Tv was working fine when left to go to store and came back to blank picture and ... my samsung tv it turns on but its completely black and no sound at all ... LG LCD TV REPAIR - NO PICTURE SCREEN FIX REVIEW - Duration: ...

LG LED TV has no picture (black screen) but still sound ...




Dec 09, 2015 | LG 47LS4500

1 Answer

My new lg 3d tv is closng on top bottom and sides is there anything i can do to cure the problem


Could you provide more information? What do you mean when you say, "closing?" Do you mean there is a black band around the picture? If so that means the original picture is recorded at a lower pixel density than your TV will display.
In the past most TV program signals provided a picture dimensions (in computer standards) very roughly 600 pixels wide by 400 pixels tall. What this means is that a picture of that pixel size will display as a small, squarish image slightly wider than it is tall on a (now) standard 1080p LCD television--which produces an image 1920 pixels wide by 1080 pixels high.
That would be nearly unwatchable (picture too small) except for the fact that most TVs compensate for the relatively small size of "standard definition TV (SD TV, as opposed to HDTV) by enlarging the image so that the top and bottom edges of the picture touch the top and bottom of the TV screen. This will leave black bands on either side of the picture. Some LCD TVs will automatically stretch BOTH dimensions of the image, which yields a distorted, "sqaushed" image.
All my comments above apply to both standard LCD and 3D-LCD TVs, by the way.
A more precise overview of the facts about TV picture size can be found here:
http://en.wikipedia.org/wiki/Display_resolution

Nov 23, 2013 | LG 42LW5300 42 Class 3D LED HDTV

1 Answer

TV picture will not display


you have a weak capacitor, I would consult further as this is just going to get worse. If you are to take the back of your tv off, and look for a swollen capacitor and replace it with the correct replacement. You will no longer have this issue. Though I have seen them last forever like that too.

Jan 05, 2012 | LG Televison & Video

1 Answer

My picture suddenly appears very dark and where I can see the picture...it has a reddish tint... Can i replace a board or two to get the picture back...I am willing to buy the boards...just need to know...


Hi


Thanks for using FixYa. A plasma TV is a very hard working device. It is working harder than any TV that has been built before, and as a result it produces a lot of heat. 75% of technical problems in plasma TV's are caused by overheating problems. X, Y sustain, buffer boards controls picture, fires the gas, and many others functions. When either of these boards goes bad common problems include negative image, no image, vertical or horizontal stripes on picture, turns on and than turns off, and many more. You’ll need to open the back off the TV and check for any swollen/bulged/leaky capacitors on these boards and replace whichever has gone bad. All this is only recommended if you have electrical expertise & know how to solder/re-solder components as these units contain high voltages even when switched off.


Please do accept the solution if the issue is resolved or else revert for further assistance.


Thanks
Rylee

Feb 05, 2010 | LG 42PC3DC 42 in. Plasma HDTV

1 Answer

Acer 3610 no picture when conected to tv


You should use hot key on you laptop which switch video out put from you notebook LCD to TV.

Usually its function key at the right lower corner and

<Fn> + <F5> Display toggle Switches display output
between the display screen,
external monitor (if connected)
and both.

I've added link to users manual download.
http://www.google.com.ua/imgres?imgurl=http://support.acer-euro.com/drivers/notebook/images/tm2350.jpg&imgrefurl=http://support.acer-euro.com/drivers/notebook/as_3610.html&h=236&w=300&sz=13&tbnid=CuA_Yb5mmgQQ4M:&tbnh=91&tbnw=116&prev=/images%3Fq%3DAcer%2B3610%2Bpictures&hl=ru&usg=__XQqdAMZB50z_xVzHzqSR1x8ArKw=&ei=6U3MStqeOtWG4Qbd56T8BQ&sa=X&oi=image_result&resnum=1&ct=image

Oct 07, 2009 | Acer Aspire One PC Notebook

2 Answers

LG LST-5100P set top box does not display menu with an older ( 1998) tv set. Cant select aspect ratios . All I can do is change channels. Any ideas? Rod


Hi Rod,

Thanks for Using FixYa. If its a 4:3 normal TV or a wide 16:9 TV then you can view high definition picture by using the ARC button on your remote control to change the wide mode(Auto,Letter Box, Pan & Scan). Also check its free user manual for more information.

LG LST-5100P User Manual

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee

Jul 22, 2009 | LG LST-4200A DTV Receiver

Not finding what you are looking for?
LG 42LE5500 42 in. TV Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

The Knight
The Knight

Level 3 Expert

74459 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...