Question about Brother Sewing Machines

Open Question

Tajima tehx-c1501 needles dont respond to start button

A short circuit happened alot of smoke came out and not the needles dont work

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tajima Tmex C-1201 won't light up ?


I went google and typed in --workshop manual for tajima tmex c-1201 sewing machine -- and found many pages with pdf downloads for repair manuals and workshop manuals
do that and find the right site for you and down load the workshop manual and that may be a way of fixing your machine

Sep 30, 2015 | Sewing Machines

1 Answer

At start up machine says press needle position button. All that happens is the motor revs up then says safety feature has been activated. Any ideas?


I used this machine in my middle school classroom. That message was in the first start up of the machine, I think it just resets the machine. The larger model also has a beginning reset button that just adjusts the arm of the machine. Is the machine working fine after the reset? Hopefully "sew"

Jan 13, 2015 | Brother PE-770 Embroidery Machine

1 Answer

How do I fix error code BC1 on Tajima Embroidery Machine when there are designs on the flashdrive that did work yesterday


The format of your program may have different formats that will work for Brother but not Tajima. The extension of the program is the key to the one to use. You will notice a program name that is the very same but the extension is different. Your program can't be found if you use the wrong extension. Use other design extension or you may need to register the program.

Nov 18, 2014 | Sewing Machines

1 Answer

Tajima embroidery machine


Hello, Error 225 Travel outside the set embroidery area
( When the software frame limit is set, or
on cap machines) Here is website for all the errors:

May 17, 2014 | Sewing Machines

1 Answer

Tajima embroidery machine troubleshooting


We are having a similar problem with one of our single head Tajima TMEX-C1201 machines. In our case the design runs part of the way, then the head jumps and continues running and ruins the work. Any feedback on this would also be appreciated. Thanks.

Jul 15, 2013 | Sewing Machines

1 Answer

Tajima embroidery machine error code 316


it sounds like their is a problem with the electronics of the
embroidery machine and the machine needs to be checked.

Dec 19, 2012 | Sewing Machines

1 Answer

Stop and start button and the needle up and down button


have you tried turning it off & then back on again.see if it resets itself.
if that doesn't work see if one of the buttons are hung, if so push on it dislodges. if it's new & none of these things work then I suggest you take it back because the circuit board is mal-functioning.

Jul 24, 2010 | Kenmore Drop-In Bobbin 16231 Mechanical...

2 Answers

What happens if the needle breaks?


Extra needles came in the accessory bag. Just unscrew the screw above the presser foot, remove the old needle and put in a new one. These are common sewing machine needles,but the LS2125 will also handle dual needles. There are numerous videos online that show how to do this.

May 17, 2010 | Brother LS-2125 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...