Question about Pioneer Elite PRO-111FD 50 in. Plasma TV

1 Answer

Pioneer 5020 will not power up and blue light flashes 8 times

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Pioneer Master
  • 74,377 Answers

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit stage inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power led, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating, to many popular brand TVs and other devices. Viewing it in "Mosaic" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given.

Posted on Feb 15, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 8457 Answers

SOURCE: pioneer plasma tv had a

The power supply board is dead.That the board,where the power a/c cord plug into it.Try website like Ebay.com to buy a refurbish power supply board for the replacement.

Posted on Mar 26, 2011

gopakumarg43
  • 74377 Answers

SOURCE: Problem with Pioneer PDP-6010FD

Hello
The set can be set right by repair. You must have through knoledge in electronics to do work with set. especially, plasma displays will have very complicated circuits. It Sustain-Boards suld be trouble shooted.

Posted on Feb 22, 2012

spr1949
  • 1182 Answers

SOURCE: blue light flashes 8 times no pic

This is an error indication of defects inside the TV and might need service.

Posted on Aug 29, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find activation code for pioneer


My pioneer 5020FD Kuro tv. when I plug power to the unit, a blue light blinks 8 times pause 2 sec. and blink 8 times repeating this and if i press power button it clicks red light and makes a clicking sound and goes back to the blue light blinking again, it did this once before and the picture came on fine until i turned it off and now it just blink the blue code.

Dec 10, 2014 | Pioneer PDP-5020FD 50 in. Plasma HDTV

4 Answers

Hi I have a Pioneer PDP-436XDE its over 3 years old and has worked perfectly until today when it switched itself off and would not switch back on. Ive unplugged it from the mains and left it for some time...


The reason for your tv not switching on properly may be due to

The main filter capacitor or other filter capacitors in the low voltage power supply is dried up and this can cause all kinds of regulation problems.

The power supply regulator is defective (or marginal) allowing excessive voltage on its output and then the X-ray protection circuitry shuts you down.

blue or red colour may be due to fault in chroma decoder circuitry.

Jul 05, 2008 | Pioneer Televison & Video

1 Answer

Pdp5080 pioneer blue light 8 blinks


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. Do a search by type in the brand name of the device to the search box.

May 19, 2014 | Pioneer PDP-5080HD 50 in. Plasma HDTV

1 Answer

Pioneer vsx 915 blue light flashing


Time for a repair shop to look, clearly the amp is down, it has failed. Have a qualified tech look at and get a repair estimate.

Dec 15, 2012 | Pioneer VSX-915 Receiver

1 Answer

Panasonic Kuro pdp-5020 8 blinks of red led


Is power voltage going to the Panel screen?Can you measure that?
Check power supply voltage distrbuition line.

Nov 04, 2012 | Pioneer PDP-5020FD 50" 1080p KURO Flat...

1 Answer

Blue light flashes 8 times no pic


This is an error indication of defects inside the TV and might need service.

Aug 28, 2012 | Pioneer PDP-4280HD 42 in. Plasma...

1 Answer

Problem with Pioneer PDP-6010FD


Hello
The set can be set right by repair. You must have through knoledge in electronics to do work with set. especially, plasma displays will have very complicated circuits. It Sustain-Boards suld be trouble shooted.

Feb 21, 2012 | Pioneer PDP-6010FD 60 in. Plasma HDTV

2 Answers

I have a pioneer gm-d8400m the amp isnt working


flashing light could mean a few different things. 1- constant power may not be there. check with a test light or multimeter. should read around 12 volts. it would be a good idea to check all the power and ground leads. make sure u have a good ground. 2- bad sub. im assuming sub since its a monoblock amp. you can meter the subs. make sure the total ohm load is no less than 2 ohms. any lower the amp will go into protect mode. 3- bad amp. power supply may be bad. the newer pioneer amps are full of protection circuits. ive been a professional installer for a shop about 8 years and we sell pioneer. hope it helps.

Dec 25, 2009 | Car Audio & Video

Not finding what you are looking for?
Pioneer Elite PRO-111FD 50 in. Plasma TV Logo

403 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74377 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...