Question about HP Photosmart C5180 All-In-One InkJet Printer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: HP 3210 failure code
Please click on the web link given below and perform the steps as provided in the web page.
Else please chat with HP online technical support.
The chat support is free of cost, where you can chat with HP online technician.
Have a great day!
Posted on Mar 27, 2008
Ink may be new, but their nozzles may be blocked; depending on manner of storage. To be sure apply a folded tissue paper to the ink nuzzle and press firmly. If the tissue comes off well blotted with ink it means you still have a good amount of ink in it and the nozzle is not blocked. If not blotted or scantily blotted, it means ink is really low or nuzzle is blocked. To be very sure of this, place nuzzle in a plate/saucer with a bit water so that the nuzzle is soaked. Leave for about 10 minutes. Then apply the tissue again. If still not well blotted it means ink is really low or empty. If new you should return it for a replacement. In the case of blocked nozzles, the procedure may be repeated over to get results.
If this doesn't work let me know.
Posted on Dec 20, 2009
Hi I found this I know your error not in here but it may work for
It worth a try nothing to lose and it may work.
I know your error code is not in this but it some times it clean the error with this type of error number you can gave it a go try not harm it
Error code: 0xc18a0201, 0xc18a0206, 0xc18a0306, 0xc18a030a, 0xd0620130, 0x887dd03a, 0xd05d010d, 0xf0af8004, 0xc19ac3ff, 0xc18a050...
Reset the product:
1. Without turning off the product, disconnect the USB cable from the rear of the product.
2. Remove the cartridges from the product.
3. Wait for the 'Insert Cartridges ' message to display on the control panel.
4. Disconnect the power cord from the back of the product.
5. Wait 60 seconds.
6. Reconnect the power cord. If the product does not automatically turn on, press the Power button ( ).
7. Reinsert the cartridges, and then close any open doors on the product.
8. If you receive a prompt to print a calibration page, do so.
9. Reconnect the USB cable to the rear of the product, and then try printing again.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
Posted on Feb 08, 2010
Tips for a great answer:
Feb 09, 2015 | HP Deskjet 3520 e-All-in-One -...
Dec 10, 2014 | HP Office Equipment & Supplies
Jul 21, 2014 | HP Deskjet 3520 e-All-in-One -...
Mar 15, 2014 | Office Equipment & Supplies
Apr 19, 2013 | HP DeskJet 3520 InkJet Printer
Mar 23, 2013 | HP DeskJet 3520 InkJet Printer
Jul 15, 2010 | HP DeskJet 3520 InkJet Printer
Apr 10, 2008 | Office Equipment & Supplies
101 people viewed this question
Usually answered in minutes!