Question about Kodak EasyShare Z650 Digital Camera
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
One or more causes may result in unclear (blurry) pictures. Some common causes and suggested solutions are listed below. The lens is dirty. Clean the lens according to the guidelines for your camera model. The subject was too close to the camera. Make sure that you are far enough away from your subject. Each camera model has recommended distances for normal, telephoto (zoom), wide-angle, and close-up pictures. The subject was farther than the effective range of the flash. Each camera model has an effective flash range. The camera did not autofocus or autoexpose the picture correctly. For best Autofocus/Autoexposure function, press the shutter button halfway down and hold. When the AF/AE Indicator (Ready Light on some cameras) turns green, press the shutter button the rest of the way down to take the picture. If the yellow light blinks, release the shutter button. (On some models, the light will also blink yellow if the shutter speed is too slow.) You did not use the LCD screen Preview feature to take a picture in Close-Up mode. When the camera is in Close-Up mode, always use the Preview feature, both to confirm focus and to aim the camera properly. If you do not do this, the viewfinder will not show you an accurate view of the picture because of parallax error. The subject or camera moved while you took the picture. Place the camera on a flat, stable surface, and hold the camera very steady. Or use a copy stand or tripod – especially advisable at telephoto or high-zoom settings, or in low light.
Posted on Aug 29, 2005
That is probably a faulty digital sensor array.
Try taking a picture and transferring the picture on a computer. If the picture on the computer is fine , then it is a faulty LCD.
If the picture is purple and blurred, the digital sensor array or the control board is defective.
The digital sensor array is the light sensible sensor chip that take the picture.
On a small camera like this can be a difficult and expensive repair.
Contact the phone number listed on the user manual and ask a quote for the repair, or ask if a warranty extension is available.
Posted on Dec 07, 2008
Try going to a camera center. They have the expertise on that matter. They can also tell you to how much is needed to get it fixed.
Posted on May 02, 2009
Tips for a great answer:
Feb 07, 2013 | Canon PowerShot A3000 IS Digital Camera
Dec 30, 2011 | Kodak EasyShare M530 Digital Camera
Sep 06, 2009 | Televison & Video
May 02, 2009 | Kodak EasyShare Z812 IS Digital Camera
Apr 13, 2009 | Cameras
Feb 26, 2009 | Kodak Easyshare M753 Digital Camera
Nov 17, 2008 | Kodak Easyshare M753 Digital Camera
25 people viewed this question
Usually answered in minutes!