Question about Kenmore Dishwashers

Open Question

Normal wash ligh blinks and start light blinks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ngfam1
  • 639 Answers

SOURCE: kenmore dishwasher blinking lights

Dear friend,
ngfam at you service! happy to assist!


The blinking lights are called codes and this is warning you that there is a technical problem. Probably an electronic failure some where. This can only be diagnosed by a trained service tech!

We sell appliances for 65 years and I recommend this nation wide Factory repair service!

Call A&E Factory Service /They service nation wide
And are available 24/7 for making appointments!

If the appliance is 10 years old or more,it may make sense not to invest any money to fix it!

Happy to assist you,
PLEASE GIVE ME A GOOD RATING BEFORE YOU SIGN OFF!

Posted on Aug 29, 2008

  • 1 Answer

SOURCE: NORMAL Wash light is blinking and I can't CANCEL

We had the same issue with ours...tried turning off at the breaker, still didn't reset. Contacted appliance repair who came in and unplugged it from underneath the sink, waited a few seconds and plugged it back...dishwasher reset and repairman charged trip charge and labor $65 BUT problem is resolved and we now know what to do in the future.

Posted on Oct 18, 2009

  • 760 Answers

SOURCE: blinking lights, not washing

Usually blinking lights are indicating bad touch panel buttons. Remove kick plate, (black panel under door) and find service instructions there. It will tell you how to test button panel, as well as any codes flashing. Also will tell you hot to try a reset.

Posted on Jul 26, 2010

  • 1 Answer

SOURCE: normal wash light blinking, d/w wont start

Wish I could solve this, as I'm having the same problem too. Normal light blinks not matter which wash button is pressed. Cancel light will light, but still NOTHING happens. Same model as yours.

Posted on Oct 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Updated details: Normal cycle keeps blinking


Have u tried unplugging it for about 2m and plug it bk in that will master reset everything like u just bought it and see how that's works out

Sep 18, 2015 | Dishwashers

1 Answer

Normal wash light is blinking but, won't start


Hello friend, thank you for your post!

From the information you have provided regarding the heated dry and washing lights blinking on your Electrolux dishwasher it sounds like it could be a possible problem within your control board. I would recommend resetting your appliance which you can by flipping the household circuit breaker in the off position for roughly ten minutes. If you continue to receive the blinking lights I would reach out to a professional to come and diagnose your appliance. I hope this helps. -Matt

Aug 12, 2014 | Electrolux Dishwashers

1 Answer

Kenmore Ultra Wash 665 dishwasher: start button not lighing


It sounds like you have a bad control console, and the problem is that your START button (the most critical one!) is bad. You can't replace just that button or key; you have to replace the entire control console.

Jul 02, 2012 | Kenmore Dishwashers

1 Answer

Normal wash light blinking, d/w wont start


Wish I could solve this, as I'm having the same problem too. Normal light blinks not matter which wash button is pressed. Cancel light will light, but still NOTHING happens. Same model as yours.

Jul 23, 2010 | Kenmore PRO 24 in BuiltIn Dishwasher with...

1 Answer

Half red ligh starts blinking then shuts off


Two possibility , first the 1of the heat sinks may have lost it's thermal seal
to the chips ie G.P.U. or C.P.U. this is more common when consoles
are played vertically . Second but less common the G.P.U. temp feed
connection has become intermittent and tripping a thermal shut down.

Remedy's are

Remove heat sinks for G.P.U. and the C.P.U clean off the old heat sink
compound and replace with new ( articsilver 5 ).

If the console still over heats ( two red lights) then the G.P.U C.P.U
will need to be re-flowed back to the board that normally corrects
the problem in 90% of over heating problems.

If you have any questions feel free to ask.

Rob

May 02, 2010 | Microsoft Xbox 360 Console

1 Answer

Verifone 900 blinking power ligh


On the P900 printer, this blinking light always means "service". The P900's are notorious for software issues after they have aged. Every time we encounter this issue (very common), the only solution is to send it in for repair (usually ~$75).

Apr 23, 2009 | VeriFone 900 Matrix Printer

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

1 Answer

Laptop Compaq N610C did not powered ON


Remove your battery - start the unit on A/C then after booting up refitted battery.

Jan 21, 2009 | Compaq Evo N610C Notebook

2 Answers

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I just read this for the same problem: push sanitize, then heat and dry, sanitize, heat and dry, sanitize, heat and dry, cancel, then open and close the door. It worked. The dishwasher is running correctly even as I type this. 

Feb 11, 2008 | Kenmore 24 in. 17262 Built-in Dishwasher

20 Answers

Kenmore dishwasher wont start blinking clean light


today January 9, 2009...blinking clean light, kenmore dishwasher would not run,,,the solution on Fixya ..."keep hitting normal -heated wash-normal -heated wash buttons over and over...unlocked the blinking green light problem. Dishwasher is running as I type this....will post again when I see the results of another washing tomorrow. H.T. Las Vegas Nv

Jan 18, 2008 | Kenmore 16602 / 16604 / 16609 Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Dishwashers Experts

D. E. Hev

Level 3 Expert

1167 Answers

Adam Dower
Adam Dower

Level 1 Expert

2 Answers

Fred Sops

Level 2 Expert

272 Answers

Are you a Kenmore Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...