Question about Skil Tools & Hardware - Others

Open Question

Replacing paper on a Skil sander 490

There has to be an efficient way to do this. We do not have a manual so we are just using a screw drive and screwing the paper in each side separately. Doing it this way almost requires 3 hands.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

comax
  • 154 Answers

SOURCE: Bosch 3107DVAS Random Orbital Sander not working.

You must replace the fan assembly. The part number is
2606610901

Hope this helps

Posted on May 05, 2009

  • 384 Answers

SOURCE: My Skil sander paper just won't stick anymore and I'm about to...

Clean the Pad.

Posted on Aug 31, 2009

  • 302 Answers

SOURCE: how to adjust belt on skil belt sander

There should be a tracking adjustment knob on the side of the sander behind the front roller. Run the saw and adjust this knob to center the belt. You will probably have to do this every time you change belts. Hope this helps you...

Posted on Sep 12, 2009

  • 1 Answer

SOURCE: what is the belt size of a skil 593 belt sander?

2 1/2" x 16"

Posted on Sep 13, 2010

wrightly
  • 140 Answers

SOURCE: I have a Skil Belt

http://cgi.ebay.com/4-x-21-3-4-sanding-belts-36-grit-qty-10-/310329120043?pt=Sanders_Sandblasters&hash=item48410e952b
this is the type of belt it uses (size rather) 4"x21 3/4" you can find them on ebay.
http://www.skiltools.com/en/ here is the official skil website. they can probably email you an owner's manual if you wish
hope this helps out. this one is vintage from what i understand
thanks,
mike w

Posted on Jul 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the Frigidaire Model BFHS2611LMO Side by Side and the handle on the right side is very loose. I took off the rubber seal on inside of door but dont see any screws to tighten. How do I tighten


The model number is actually BFHS2611LM0. The handles have keyhole openings that fit over the pair of screws (near the top and bottom of the handle) on the outside of the doors. Try pushing the right side handle forward and down to lock it back onto those screws. If that doesn't solve the problem, push the handle up and then lift it off the screws. Then tighten the screws a bit (or replace them if they have stripped threads). Then replace the handle over the screws and push the handle down. Do not overtighten the screws; that can damage the door components. The manuals is available from Frigidaire's support site: http://b2b.frigidaire.com/support/manuals.asp . The support page for your refrigerator is here: http://b2b.frigidaire.com/support/ResultsPage.asp?strModel=BFHS2611LM0&User=&Search=Search . The parts diagram shows how the handles are attached; it's the last link on the support page.

I hope this helps.

Cindy Wells
(please replace the door seal properly to ensure that your refrigerator maintains it's efficiency. http://www.searspartsdirect.com/frigidaire-refrigerator-parts/model-BFHS2611LM0/1428/0165000.html has another copy of the parts diagrams with the parts for sale.)

Jul 28, 2015 | Frigidaire Refrigerators

2 Answers

How to disassemble the sony drx-710UL


Remove the 4 rubber feet to expose the screws. Remove the screws. Slice the label on the side along the case halves. Insert a paper clip into one of the tiny holes on the rear corners and press lightly will lifting the lid to release the catch. Do this to the other rear corner and the top will come off easily then.
With the top removed, gently lift off one side of the metal cover over the interface PC board and remove the cover. Remove the 4 screws securing the board to the bottom case. Remove the 4 screws securing the drive to the bottom case.

Mar 17, 2011 | Sony Computers & Internet

1 Answer

There are 7 non-metallic small washers in my m2n68 barebones kit. when I install the motherboard to the chassis, do I use these washers with the mounting screws? if not what are they for?


Probably red on one side? Like paper almost?
These simply provide a buffer between the screws and the circuit board to prevent pressure cracks when over tightening the screws. Some people use them on drive mounting screws to lower vibration noise.

Cheers!
-Lucas

Feb 20, 2011 | ASUS M2N68-AM PLUS Motherboard w/ AMD...

1 Answer

Only prints from the MP feeder and not through tray 1 anymore


if your printer only prints from the mp tray this is saying that it no longer recognizes tray one.
the first thing to check is the paper size fingers on the side of the tray. pull the paper tray all of the way out of the printer. there is a snap in plate on the left side of the tray. for letter size paper 2 fingers should be sticking out. if the fingers are present and not broken off. look into the opening that the tray was removed c
from on the left side half way back there will be 4 metal tabs make sure these are even and straight. if both of these are not damaged.remove the logic pack (metal cage behind the left side cover. loosen the 6 screws and remove the out cover. on the inside of this box remove the screw located upper right hand corner, remove the screw in the lower right corner, and the screw from the upper left corner. now one more screw on the back of this box lower left corner remove this screww then pull up on the box and set it aside. at this point you will see the main motor drive in the middle of this side dierictly under the motor you will see a small pcb that is attached with 2 screws ramove these and rfeplace this board it is the paper size select pcb and it needs replaced

Jan 06, 2011 | Lexmark Optra T610 Laser Printer

1 Answer

How do I remove a cd-rom from a hp dv5


1) Work on a table.

2) Remove ALL power to the laptop. AC adapter (Charger) and Battery.

3) Turn the laptop over Front facing you. There is one single Philips head screw to remove.
It's on the bottom of the laptop towards the Front, and is just past the Microphone, and Headphone jacks.

4) Screw removed use a paper clip to open the optical drive tray.
The paper clip is straightened out, then a third of it is bent into a handle to hang onto.

Looking at the optical drive with the laptop upside down, there is a small hole to the Left, on the optical drive tray. Insert the paper clip tool you just made into the hole.
This is a manual release to open the optical drive tray.

Hold onto the optical drive tray with your fingers, pull the optical drive out.

If you are going to replace the optical drive, be sure to remove the optical drive bracket from the back of the optical drive. (Two Philips screws) Install the bracket on the new optical drive.

Regards,
joecoolvette

Nov 15, 2010 | Computers & Internet

1 Answer

Cd drive stuck


You should be able to simply use a paper clip (unbent) and push it through the very small hole on the front of the CD tray.
This will manually open the cd tray.

Apr 01, 2010 | Systemax Ascent PC Desktop

3 Answers

Need to replace cd player in Compaq persrio 700 how do I do it? no screws in hinge covers?


Laptop off, remove the AC adapter, (Charger), if installed.
Remove the battery. Turn the laptop over so the bottom side is up.

Face the optical drive towards you. (CD drive)
See how there is a rectangular looking panel, on the bottom of the laptop? (Looking at the CD drive, the panel is over the CD drive. Bottom side of laptop)

See the single Philips head screw in the panel, towards the left corner?
Remove it.
Now take a paper clip, and bend it out straight. Make a small U-shape on the end of the straightened out paper clip, so you have something to hang onto.

On the drive tray that comes out of the CD drive, is a small hole. Insert the paper clip straight in.

This is a manual release to open the CD drive tray.
Gives you something to hang onto, to pull the CD drive out.

To install the new cd drive, (Player), just reverse these steps.

[Open drive tray. Slide CD drive in. Replace screw]

Nov 24, 2009 | Compaq Presario 700 470024-192 Notebook

1 Answer

How to remove the mounting flange from a circular, one-arm toilet paper holder, so it can be re-mounted? there is no set screw to release it-- the flange has two screw holes on either side of a center...


you will need a vary small flat screw drive and at the bottom of the holder the is a small hole insert screw driver and un screw, it has a small screw that holds to the plate on the wall

May 05, 2009 | YORKSHIRE 5308 - Yorkshire Paper Holder -...

2 Answers

Remove stuck tape


It depends on the type of TD you are using. For many TDs, there is a manual eject screw, either on the bottom or side of the drive. You can usually access this screw without removing the cover or faceplate (although side mounting rails may need to come off). The manual ejection screw is usually recessed a little bit, and may even be covered by a piece of clear plastic (in the case of DDS 4-5 drives). It will also have an arrow indicating which way to turn to load or unload. There are usually standards within each seperate TD technology - but there is no standard across all tape drives - and Tandberg as a company is notorious for not having one at all. DDS 4 and 5 for instance - the screw is on the right side of the drive, near the rear, turning the screw clockwise will unload the media.

For a Tandberg LTO2 drive, there is no way to remove the media without removing the top cover and essentially rendering the drive unusable. If your drive or server is under warranty with onsite support - that would be the best option for a Tandberg LTO2 drive

Mar 26, 2008 | Tandberg Data 220LTO LTO 1 Tape Drive

Not finding what you are looking for?
Tools & Hardware - Others Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Skil Tools & Hardware - Others Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

ray gallant

Level 3 Expert

41394 Answers

richie46

Level 3 Expert

8014 Answers

Are you a Skil Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...