Question about Canon PowerShot D10 Digital Camera

1 Answer

D10 wont turn on

Newly charged battery and wont turn on.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Canon Master
  • 6,702 Answers

The manual in this case says:
Confirm the battery is properly inserted. (Some people manage to put in the battery, the wrong way around) Please check.
Confirm the memory card/battery cover is securely closed.
And if the battery terminals are dirty, battery performance will decrease. Clear the terminals with a cotton swab and reinsert the battery several times.
Also in low temperatures, the battery won't deliver enough power.
If you want to be sure the battery is still good enough, use a multimeter to check the voltage. The measured voltage should be a little above the voltage printed on the battery. In your case above 3,7 Volt. If it is just 3,7 or lower, you can be sure the batty has had its best days and won't be delivering enough power (current) to let the camera work correct. in that case try another battery.

Posted on Feb 15, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Charged batteries but wont turn on

check for possible corrosion on the battery contact, then power on key for sticky, use CRC spry to clean.

Jul 18, 2015 | Sony Cyber-shot DSC-HX1 Digital Camera

1 Answer

Changed batteries, wont turn on.. Vivicam 5022

Welcome to FixYa.

1. Make sure that the battery meets the required battery type for your camera.
2. If you are using rechargeable battery, make sure it is charged properly.
3. The battery you newly bought might be defective. It happens once in a while specially if the battery is an old stock.

Thank you for using FixYa.

Sep 24, 2011 | Vivitar Cameras

1 Answer

Install new charged rechargable batteries and will be dead batteries in bout 2 hrs not even turned on. take 2 pics and gone

Is your newly charged battery are new? Maybe your battery is worn out already. Or buy a new rechargable batteries and observe. Remember do not over charge your battery, this is always the reason why your battery got easily worn out. Thanks

Sep 11, 2011 | Kodak EasyShare C875 Digital Camera

1 Answer

I am on a working trip. My camera will not charge from the USB port. I do not have the charger with me.

The D10 doesn't charge the battery through the USB port. Connecting the camera actually drains the battery faster, since it has to communicate with the computer (even if it's only to say it has nothing to say).

A well-stocked camera store should have a battery and/or charger. Another possible source is a battery store, such as

Apr 15, 2011 | Canon PowerShot D10 Digital Camera

1 Answer

After installing newly charged batter when I turn

How old is the batt.? I purchased a digital camera and after 2 months the batt. went bad. Have had it now 2 years and several batt.later.

Dec 25, 2009 | DXG Technology Video Cameras

1 Answer

My canon 500d wont turn on. the batteries are newly charged

Check that the battery is inserted in the right direction and that it is making good contact. I found with an earlier model that the lid didn't push the battery far enough down. Inserting a piece of cardboard just under the lid pushed it down to make better contact.

Oct 25, 2009 | Canon EOS 500D / Digital Rebel T1i Digital...

1 Answer

Newly charged batteries don't work

try going to and download the firmware update for your camer, it will work fine after that

Jun 26, 2009 | Canon PowerShot S2 IS Digital Camera

1 Answer

The batteries for my Samsung Digital Camera VP D10 show as fully charged, but last only a couple of minutes. Also the camera loses the date and time. Will replacement batteries fix this?

replacing the battery will resolve only your first problem .........but regarding date and time problem you need to go for software check in your phone .......

Jul 31, 2008 | Samsung Cameras

Not finding what you are looking for?
Canon PowerShot D10 Digital Camera Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts


Level 2 Expert

176 Answers

old marine
old marine

Level 3 Expert

2152 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides