Question about Singer Quantum 9940 Computerized Sewing Machine
Letters not sewing it does not advance to next letter
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Sounds like your embroidery foot isn't on properly. I have had this exact same problem and have had many needles break... it's because I didn't have the foot on nice and straight, even though it seemed like it. Try taking it off and putting it back on - you may have to do it several times, but once it's on properly, the needle should be dead-center of the little metal loop of the embroidery foot. If it's off, even a bit, the needle will break. Hope that helps. Remember -- patience, patience, patience!!!
Posted on Dec 05, 2009
SOURCE: I just purchased a used
If there is a tension in the string this problem could arise see if the tensions are not present.
1. Check if top thread unwinds and feeds up well. If it falls ? it creates too high tread tension by not giving the thread to unwind properly.
2. Check that the needle is good, not sticky, and allows the thread to come through it easily. It should have a large enough eye.
3)Hitting the bobbin case may have knocked the timing off and the shuttle may have to be replaced.so if you have hands on it replace it or take it to the service centre.
post a comment for further assistance.
Thank you for using fixya have a nice day:-)
Posted on Sep 05, 2010
First let's identify your machine. Can you post a picture front and back?
Posted on Jul 27, 2012
Tips for a great answer:
Feb 08, 2017 | Singer Quantum 9940 Computerized Sewing...
Sep 25, 2014 | Singer Quantum 9940 Computerized Sewing...
Apr 30, 2014 | Singer Quantum XL-1000 Computerized Sewing...
Dec 23, 2017 | Singer Quantum 9940 Computerized Sewing...
Dec 26, 2010 | Singer Quantum 9940 Computerized Sewing...
Aug 24, 2010 | Singer Quantum 9940 Computerized Sewing...
Aug 23, 2010 | Singer Quantum 9940 Computerized Sewing...
Feb 24, 2009 | Singer Quantum 9940 Computerized Sewing...
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: