Question about Leupold Optics

Open Question

Daisy powerline 340

It loads and makes a thud when i shoot and the bb just rolls out the barrel

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 2100 Answers

SOURCE: I work the lever to load one BB. then pump 6 or 7

Can you see through the barrel? Or run a rod down the bore? It sounds like the BB is either falling out the end of the barrel or the BBs are getting jammed up in there. Do not hold your hand in front of the barrel to see if any air comes out. You might get stung with 10 BBs. Hope this helps.

Posted on May 30, 2010

  • 243 Answers

SOURCE: how do you dial a 4x15 scope on a powerline 880s

If you are looking to zero your scope, go here for an excellent explanation:

Posted on May 31, 2010

  • 2702 Answers

SOURCE: Barrel will not stay open when broken for loading.

bad triger,,,getb it fixed,,,as for the bent barrel they bend if you let them spring back a lot!

Posted on Sep 06, 2010

  • 1 Answer

SOURCE: my daisy powerline 201 bb gun has jamed up what

If it is stuck in the pellet hole just put a magnet over the hole boom pellet out

Posted on Mar 11, 2012

  • 2 Answers

SOURCE: I need instructions on reassembling my daisy 880 powerline airgun

I found this video that may be able to help you. Good luck.

Posted on Jun 15, 2012

Testimonial: "Thanks so much to all who offered help. I got the answer I needed and am on the path to bb gun repair.:-)"

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Daisy Powerline 340 shoots very weakly

replace the piston seal
check for air leaks

Apr 12, 2017 | Office Equipment & Supplies

1 Answer

Daisy air rifle repair

There are plenty of forums for Daisy. The gun is repairable, an I think they sell a repair kit. Just search around for them.

Mar 30, 2014 | Toys

1 Answer

I need a manual for my daisy powerline model 1700 co2 bb pistol

You can contact daisy and they likely have the manual, you will need the serial number etc.

Nov 08, 2013 | Daisy Toys

1 Answer

Powerline 340 daisy barrels has bullets stuck next to it

Hi Andrew:
I had a look on Google..
It would appear that you will need to dismantle it, remove the bb's and then re-assemble it.
Make sure you are only trying to use .177 BB's, not pellets.

Oct 22, 2013 | Tools & Hardware - Others

1 Answer

Why my crosman recruit .177 shoots inconsistently?

I hear that the ammo has alot to do with that. .BB on a unrifled barrel gun are not as good as pellets. Lead pellets ride on the rifling in the barrel. And also your sites could be out of line. One man took the inner barrel out of the outer barrel and bent it over his knee slighty.His rifle was shooting high. On his daisy model # 880 Powerline.. But I would not go that far.A unrifled barrel is best for BB's.only.Hope I can help you out.Yours truly Joseph Alexander Bagli.

Jul 10, 2012 | Crosman Recruit Multi-Pump .177 caliber...

1 Answer

How do you load a Daisy model 99 BB gun?

Unscrew the barrel insert from the barrel and pull it out. There is a sliding tab that you have to slide towards the end of the barrel insert so that it can be loaded. On the smaller side of the insert, about half way down is the loading hole. Fill with about 20 BB's. Release the tab and carefully put the barrel insert back into the barrel and tighten till snug. Should be ready to go.

Oct 10, 2009 | Daisy Toys

4 Answers

Daisy Red Ryder BB gun won't shoot

1) **** the gun and look through the hole in the top, half way down the barrel.

2) You should see a BB loaded into this area.
- if no bb is present and you can see a circular magnet, then it is not loading.

3) if the bb is present and does not exit the barrel when you fire the gun, then the bb is deformed and will require the rifle to be dissasembled and rodded through the back side, forcing the bad bb out of the way.

4) If no bb or magnet is present through the hole, call daisy for a replacement. This indicates the shot tube has moved and will no longer load.

Apr 05, 2009 | Toys

Not finding what you are looking for?
Optics Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Leupold Optics Experts

Brad Brown

Level 3 Expert

15645 Answers

ray gallant

Level 3 Expert

44341 Answers

Bill Boyd

Level 3 Expert

42705 Answers

Are you a Leupold Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides