Cannot eject cd fron stanton c.324 - Stanton Audio Players & Recorders

Same issue here! Forget all the laser talk, ain't always the issue. When the cd sticks, give the unit a couple of taps/knocks on the side. The cd goes in no problem. Do the same when you eject the cd. It's a workaround, i can still use mine! If you're using timecode cds, it's all good!

I repair them. Email me for more assistance. [email protected]

how do i hook my stanton c.324 cd player to a computer

Visit this site for more details. Type in the site name Electro-help either to Google or Yahoo search box and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is displayed here in web.
You can get details to this fault from here.

It could be caused by a few things :
1) The CD was not burned correctly or did not complete. Try using an original CD and see if it works 2) Some MP3s when downloaded from online sources have a digital protection which prevents it from playing once burned into a CD. 3) The brand of CDRs you are using are not good. Try another brand
If all the above do not fix it, I recommend that you send the unit for warranty or repair. The optical laser could have been damaged.

my stanton 324 keep saying no disk i use the lrns cleaner still no good

You need a new laser or laser mechanism. You can order one online no problem. The part number is: Sony KSS 213Q. make sure there is a Q at the end of it because sony makes a lot of different laser types and the one inside the Stanton C.324 is the Q. Yes the C.324 has Sony guts. You might also want to look into ordering a RF Signal Processor Chip. the part number is: CXA 2581N. Once again make sure the part number ends with a N. This part you might have a little more trouble finding online but it is possible. The laser mechanism you can find on Ebay for about 20$ to 30$ and if you order it from stanton magnetics it will run you about 200$. The signal processor I bought the other day from a Sony parts Dealer in my home town for 20$. Im having an Electronics Repair place do it for very cheap. If you send your stanton c.324 to stanton magnetics you will end up paying more than the turntable is worth brand new unless you have valid warranty still on it.

Hope I could help you with the problem. Cheers.

Try tilting the turntable so that that slot is facing the floor then HOLD and PRESS eject until it ejects, it should come out, i had the same problem with my c324s

The first step is to clean the lens of the player using a cotton swab and alcohol. If that failes to resolve the problem, it is likely that the optics are starting to fail and need to be replaced.

Please clean the lens and update this with the results.

Thanks,
Dan

Remove the power completely replug and then quickly turn it on press eject emediatly..... this should work