Question about Frigidaire ATF6000ES Front Load Washer
The machine stopped working . The machine beeps when I push the buttons. That is it.The code L:OC comes up on the digital display, followed by P:AU and then 0:00, and continues to flash between P:AU and 0:00 while I am still pushing the buttons.I have tried unplugging the machine and tried pressing the start and cancel buttons simultaneously. Nothing works.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
All the lights are on, but the door lock. We have unplugged it, doesn't help. Our washer is the front load, model LTF 2140ES0.
Posted on Aug 19, 2008
I fixed this myself and it only took about 5 minutes. The problem is the door latch needs to be reset, which requires unplugging it's three electrical connections. This has to be done inside the washer outer seal, but it is easy to get to. First remove the outer ring that holds the seal on. Next remove only the side of the seal closest to the door latch (again only the outer seal needs to be undone). With this done remove the two screws holding the door latch in place (inside). Remove the latch, unplug the three connectors, plug them back in then reassemble everything. When all is back in place hit "cancel" and it should be good to go.
Posted on Jan 10, 2009
SOURCE: FAFW3577KWO washer-code E11
Your machine may have short circuit with the inlet valve since you are facing problem after 5 to 6 mins you are suppose to change the inlet valve
Posted on Dec 24, 2009
Tips for a great answer:
Thank you for your post, campy chaney!
I understand that your Frigidaire washer is displaying an error code of "PAV". "PAV" is not a valid error code, your washer maybe displaying a "PAU" error code. It could be a possible issue with a low light on your LED panel. If it is a "PAU" code that could be an interruption within your cycle. I would suggest performing a reset on your washer and you can do that by flipping the household circuit breaker off for roughly ten minutes. When you restore power to your washer and continue receiving the "PAU" code I would suggest having a professional technician out. This could be a possible problem with your control panel, door latch, or door strike. Since it could be anyone of these underlying having a technician out would help avoid any unnecessary part purchases. Hopefully this information is helpful. -Matt
Feb 06, 2015 | Frigidaire ATF6000ES Front Load Washer
Oct 15, 2012 | Frigidaire Washing Machines
Jul 10, 2010 | Kenmore 46462 Front Load Washer
Dec 24, 2009 | Frigidaire ATF6000ES Front Load Washer
Dec 13, 2009 | Frigidaire ATF6000ES Front Load Washer
Dec 01, 2007 | Frigidaire GLTF2940ES Front Load Washer
21 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: