Question about Kenmore HE4t 3.8 Cu. Ft. King Size Capacity Plus Front Load Washer

1 Answer

I want a manual for My Kenmore HE4T Front Load Washer

Can anyone please help me find the owners manual for this washing machine? I can't find it anywhere, even online at the Kenmore site. (A similar model's manual will be acceptable at this point, but I don't know which are similar.)

Posted by on

  • moosey10 Feb 14, 2014

    I put much more information in the original post, and the site defaulted to a different description. (Not good, Fixya. No wonder questions don\'t get answered on this site.) This is a Kenmore Smartwash Quietpak9 HE4T front load, Model #11045087400.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

This site has lots of manuals. http://www.manualslib.com/products/Kenmore-He4t-110-4508-3024385.html#.VPmnI5cyiQE.mailto

Posted on Mar 06, 2015

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 314 Answers

SOURCE: Replacing the Door Bellow on Kenmore Elite Front Loaders

Hi. Open up the back of the dryer after unplugging it. Take a deep breath. This is not that hard. A dryer is a very simple thing but you need to relax and figure out what the parts are. A dryer has a very basic parts list. The obvious I will not go into with but here goes with the electrical in the guts of the machine. A motor to turn the drum. A heating element. A sensor to sense high temps for safety shutoff of the element. A blower for air. Keep in mind as you look at this that usually power wires are black or red. You will see some wires that are attached to a sensor and then on to the heating elements. Take a test light or volt ohm meter and see if the high temp limit sensor is bad. This can be a simple ten dollar one from Radio Shack. That is, it will it get continuity through it. You may have to detach the wires on this sensor to do this test. The sensor is usually a flattened round disc with two leads coming out of it. Test the element same as the sensor. Take the part where there is no continuity through them to the appliance parts store with the model and serial number of the dryer for appropriate parts. Maybe ten bucks. I know it sounds scary but you may learn something and if all else fails just pickup the phone and call the repairman. Hope this helps.
good luck
please rate thes

Posted on Jan 10, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to repair HE4t with HF code?


HE4T had problem on control board when early time version. Later they modified control board and find new version should fix your problem.

Apr 24, 2014 | Kenmore 3.8 cu. ft. HE4t Front Load Washer

1 Answer

How do you reverse the front door on a Kenmore HE4t washer?


The Kenmore HE4T washer does not have a reversible door. The matching dryer would have a reversible door.

Some newer washers do have a reversible door but it is still a very small number of washer that allow you to reverse the door.

You can not reverse the door on an HE4T washer.

Aug 21, 2011 | Kenmore HE4t 3.8 Cu. Ft. King Size...

1 Answer

Washer won't unlock flashes f14.....Kenmore Elite HE4t


F14 for Kenmore (Whirlpool) machines means EEPROM Error.

The Central Control Unit (CCU) receives it's data from an EEPROM on board the CCU, if there is an error reading this data, it will cause this error.

A power glitch may cause this error. Try unplugging the Unit for two minutes to see if that fixes the error. Check CCU. So its likely you'll need a new CCU board.

Check your owners manual, some models have up to a 5 year parts warranty on that CCU.

Jul 21, 2011 | Kenmore HE4t 3.8 Cu. Ft. King Size...

1 Answer

Kenmore elite error code


possible electronics failure. my HE4t has completly gone dead at the control panel after displaying error codes. A class action law suite is in the works on the HE3t HE4t machines.

Aug 20, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

What is kenmore he4t button sequence for


If the washer does not come equipped with a "Clean" cycle, then run the washer on it's hottest setting. "Sanitary" or "Whitest Whites" will do. Hope this helps.

Feb 04, 2008 | Kenmore 3.8 cu. ft. HE4t Front Load Washer

Not finding what you are looking for?
Kenmore HE4t 3.8 Cu. Ft. King Size Capacity Plus Front Load Washer Logo

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2330 Answers

fordexpert

Level 3 Expert

5546 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...