Question about Air Tools & Compressors

Open Question

Paslode im 350,fan making strange noise,and now it is not working at all

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 131 Answers

SOURCE: paslode 350 wont fire

Hi,
Probably needs cleaning. You`ll need two new o`rings.

Posted on Aug 26, 2009

Ad
rowdy45176
  • 2176 Answers

SOURCE: My paslode im 350 framing nailer is firing only 1

when was the last time serviced, could be dirt or a dry cylinder, also the o rings might be worn not allowing it to seal properly and also check the expiration date on the fuel cell. All of these could be the problem, let me know and you can also go to Paslode.com and type in your model number for an owners manual with a troubleshooting guide in the back.

Posted on Oct 10, 2009

rowdy45176
  • 2176 Answers

SOURCE: I have a paslode im 350 and its not sparking

check the spark plug and also the spark plug wire, making sure that it is fully inserted into the spark unit. Also look for loose connectors at the switch area. I have seen all these.

Posted on Jun 30, 2010

  • 2 Answers

SOURCE: IM250 not firing.

I know this post is old, but nothing worked for me until I tried the following.

little plastic triangle pin that fuel cell tip plugs into was somehow plugged in to far. pull that out, plug in gently, retry nailer.

Posted on Feb 14, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My paslode doesnt work! battery is charged but when i fire the fan makes a wee noise! i opened it and put battery in and pulled trigger and the fan move half a turn. what could this be?fan or wiring?


Morning Andrew,

When was the tool last serviced? Seems rather strange that the fan has only turned 1/2 a rotation. Sometimes, the trigger unit can fail on this tool but.... I'd suggest that you don't try too many times as potentially, you could burn the fan motor out?

Just a thought though, if you disconnect the power to the fan, can you either see or, hear the spark being generated?

Regards
Alex Leigh Co Limited

Apr 08, 2015 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Have a paslode 350 it wont fire/ have spark, have new gas, fan works ,what could be wrong


The primary cause of a Paslode not firing is from a dirty combustion chamber. Try cleaning it with Paslode cleaner and as long as you have good fuel, good spark, and the fan works, it should fire.

May 25, 2014 | Air Tools & Compressors

1 Answer

Paslode 350 wont fire nail,gas new,fan works,have spark what to check next


The primary cause of a Paslode not firing is from a dirty combustion chamber. Try cleaning it with Paslode cleaner and as long as you have good fuel, good spark, and the fan works, it should fire.

May 25, 2014 | Air Tools & Compressors

1 Answer

Paslode 350 nailer wont work , push to fire fan works for 2 seconds then light flashes from green to red


Hi,
Sounds like a battery contact problem or a bad battery..


Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101


Feb 17, 2011 | Dewalt D55141FNBN HeavyDuty 16Gauge Finish...

1 Answer

Hi .my im350 nail gun isnt working gas and battery ok and gun is cleaned.light on green .but when depresssed makes strange noise and lights on fire from fan end?


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



././

Oct 24, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

Paslode im 350 just cleaned it now it wont work,the led on the handle slowly blinks red/green


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



/,./,.

Sep 10, 2010 | Craftsman Nailer Kit, Palm Air Driver

1 Answer

I have a paslode im 350 and its not sparking all the time any ideas


check the spark plug and also the spark plug wire, making sure that it is fully inserted into the spark unit. Also look for loose connectors at the switch area. I have seen all these.

Jun 29, 2010 | RTO PasLode 900420 Impulse Framing Nailer

2 Answers

IM250 not firing.


Hi,

Here is a tip that I wrote about the Paslode nailers and the problems that can come up with them.

I also have a link to the Paslode manuals which contain Paslode cleaning and troubleshooting guides.

If you need parts for your Paslode, there also is a link for a site that sells the Paslode nailer parts.

Paslode Cordless Nailer Problems



heatman101



'l;l;

Apr 12, 2010 | RTO PasLode 900420 Impulse Framing Nailer

1 Answer

My GE 48 inch built in fridge began making a strange noise.


fan motor problem ge has the solucion replacement fan motor around $350 plus mine still makes the noise

Jun 19, 2009 | GE Monogram ZISS480DRSS Stainless Steel

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1388 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

16037 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...