Question about Lexmark Look E332n Laser Printer Look

1 Answer

Printer prints off left side of page

This printer prints off the left side of the page. It is like as if the margin for a 8.5" x 11" page was set to maybe 9". When I print a Word document, it prints to the very edge of the page, and then drops several characters at the end of every line. See http://i.imgur.com/13ZmmiC.jpg?1 When I print a series of 1.00" square boxes (8 across) from Corel Designer, they print 1.00 inch height, but about 1 1/16" wide, with the far right box disappearing off the page. An other printer prints the squares exactly 1.00" square (measured with a calipers), as well as leaving a margin on the right. This is a photo of the page with a ruler on it, showing the problem. See http://i.imgur.com/NAkPj6Q.jpg When the problem showed up, we tried an old toner cartridge in the hopes that it was the cartridge, but it shows the same problem with the three old cartridges we have - so I know it's not the cartridge.

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

You're Registration is off. This is an adjustment that must be done in the Diagnostic mode of the printer. You're better off getting an actual tech who knows how to make this adjustment. You can move the image left/right and top/bottom. Can mess things up bad if you don't know what you're doing.

Posted on Mar 20, 2017

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Printtech
  • 1087 Answers

SOURCE: Lexmark S605 printing blue streaks

If you're still having problem with the printer, please contact us at LxkListens@Lexmark.com or http://bit.ly/boldchat.

Posted on Aug 27, 2012

Printtech
  • 1087 Answers

SOURCE: when I print colored squars show up in the background

Update your printer firmware http://bit.ly/JqfYcG

After successfully updating your printer, run the Deep Clean Printhead function on your printer.Press the Setup button > Maintenance > Deep Clean Printhead.

If you're still having problem, please scan and email us a test page (Setup button > Maintenance > Print Test Page) to LxkListens@Lexmark.com.

Posted on Aug 27, 2012

vidurangamad
  • 2 Answers

SOURCE: Printer prints off the side of the page

Hp2600n Colour Printer Colou Problms

Posted on Feb 14, 2014

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon pixma print half


That's a problem with print margins in either the software you use or in the printer settings, unsure, check both

Jul 25, 2013 | Office Equipment & Supplies

1 Answer

I am trying to print a booklet 2 pages per sheet double sided. Printing is OK but spacing is no good for the binding when the pages are cut in two. What instructions should I give the printer to allow...


Hi

By spacing, I assume you mean the margins at the centre.

The default margin settings are not the same for the right and left hand side of the page, so the printing on the reverse side is offset from the printing on the first side.

The right margin is always wider to allow for punch holes in file paper.

It is not the printer settings you need to adjust, it is the page layout of your word processing software.

Adjust the margin settings manually. In MS Office 2007:

Page Layout > Margins > Mirrored Margins.

Hope this helps.

Aug 24, 2011 | Canon PIXMA MP610 InkJet Printer

2 Answers

The printer will not print on the half inch left edge of the page.


go to settings and change the left margin to 0.0. if in Word, then file->page setup and set the margins to what you want, left margin to 0.0 in your case.

Sep 02, 2009 | Laser Office Equipment & Supplies

1 Answer

Cannot print avery labels, get message the margins of section 1 are set outside the printable page, or will run thru printer , printing complete get blank page


I assume this error is occuring in Microsoft Word.
  1. Create a new document, with a full page of the label you are having trouble printing.
  2. To see the margin settings of your document, go to File > Page Setup (or Page Layout > Margins > Custom Margins for Word 2007).
  3. Click OK on the margins dialog, and Word will check the settings against your currently selected printer. If a margin is set outside the printable area (usually the bottom margin set to zero), you should see the warning message.
  4. Click the Fix button to have Word change the margins
    to match your printer. You should now see the Margins dialog with the new margin settings.
  5. Click OK.
One thing to watch for- on some inkjet printers, the printable area is narrower than the labels. This will cause the labels to shift to the right on the page and be misaligned when you print.
If the labels run off the right edge of the page display, or are misaligned when you print, an extra procedure is needed.
  1. Undo ([Ctrl]+[Z]) the new margin setting, or create a new page from the label template again.
  2. Select the entire table of labels ([Ctrl]+[A]).
  3. Right-click the table, and select Table Properties.
  4. Click the Text wrapping "Around" option, then the Positioning button.
  5. Change the Horizontal position to Center, Relative to Page.
    Uncheck the "Move with text" option. Click OK to the Table Positioning dialog, then click OK to the Table Properties dialog.
  6. Left-click (or press an arrow key) to "deselect" the table, then go into the margins dialog (see above) and allow Word to fix the margin settings again.
With the labels aligned to the page, rather than the margins, the new margin settings should not cause the labels to shift.
Once you have the margins set correctly for your printer, I would save the empty page of labels to use as a "template".

Jun 29, 2009 | Lexmark P3150 All-In-One InkJet Printer

1 Answer

Always prints more to left than established margin


Check you Page Setup andmargin set. Sounds like the page isn't set up properly. When you typing a document, go to the FILE then PAGE SETUP. Margins and Paper Layout.
Hope this helps. Bud

Jan 08, 2009 | Lexmark Optra T610 Laser Printer

1 Answer

Left side of page cut off printing from Outlook 2003


Hi there,
Have you try to Copy paste the content of Outlook to Word and then try to print.

As Outlook have lesser option to set for printing. And may not possess all the features to print it correctly.

Let me know if I can assist you further.
Regards
Ellin

Sep 24, 2008 | Canon PIXMA iP90 Mobile Printer

1 Answer

Missing left edge


try to change the settings of the printer. maybe your document is on portrate position and your margins.

Jan 31, 2008 | Samsung CLP 300 Laser Printer

1 Answer

Margin problem


Problem---Printer prints email on the very edge of the paper and leaves off the first 3 letters of every word down the edge of that margin. If you have Windows Live Mail forget trying to fix it from there. Clicking File will not give you the page setup option you are looking for. Go to the bottom of the screen, click "all programs", look for and click "Internet Explorer", click File, click "page setup". A screen comes up in which you can change the margins. The left margin is probably set on .25. Change it to .75. Okay. Go back and run a test email.

Dec 19, 2007 | HP Photosmart 7450 InkJet Printer

5 Answers

Paper margin problem in pagemaker application


Do you mean the left margin is too large so all the content is shifted to the right and off the page? If this is the case, it is probably a setting in Pagemaker. In the file menu, choose "page setup" or "print setup". Check the paper size. Check the margins.

Jun 24, 2006 | HP Color LaserJet 2600n Printer

Not finding what you are looking for?
Lexmark Look E332n Laser Printer Look Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...