French connection fc1150BN set time

LUN is French for MON - so either learn the French terms or find the manual

1. click the top button to stop the second hand
   
2. click the bottom button to reset the timer
3. pull the crown out all the way
4. twist the crown forward hard and fast for a few seconds. The minute hand will start advancing very quickly.
5. when the desired date and time is reached, push the crown back in place. If you missed the time, pull the crown back out and twist backwards. The minute hand will move slowly in reverse. If you twist hard and fast, the minute hand will start spinning in reverse again.

The crown is lock that's why you cant pull the crown to set.The crown has a thread that lock, you must winding it clockwise to unthread it, so you can set the time..

Regards:
VOTIT

Dont forget to rate:

Follow this link:

http://www.citizenwatch.com/COC/French/settings.asp

You can change language as well. This one is in French.

Rate me, please.

If you pull out the stem 1/2 way, you set the date one direction, and the day the other. If you pull it out all the way, it moves the hands and sets the time.

retailer contacted rotary.
apparently there is quite a delay (hours) before the day eventually chages back to English. In other words it doesn't change immediately after 12pm but sometime early in the morning?
The moral of the story is that you should be in bed before 12pm and not to take any notice of the day on your watch since it will still be yesterday and in French?

you have a bit of french I think stuck on your watch. it may have been a misprint, but I cannot be sure.