Question about Epson Stylus CX6400 All-In-One InkJet Printer
That's about it i turned it on and that's what i see it was working fine before i shipped it here to north carolina
Posted by Anonymous on
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could be the waste ink tank is full. Take a look in at www.fixyourownprinter.com. Aslso a useful download is the SSC Epson utility that carries out many 'managment' functioms and has its own forum also www.ssclg.com And last but not least - Epson customer support
Posted on Aug 06, 2007
This may be very simple. Turn the unit off and lift up the top. On the forward side of the unit you will find a little 'slider switch'. This is the scanner unlock - toggle the switch back and forth several times and leave in the unlock position. Turn on the printer and all will be well.
Posted on Sep 09, 2007
Finally figured out the problem.
1. Took waste pad out and cleaned with paper towel. Couldn't find a replacement waste pad, so needed to clean it instead.
2. Downloaded SSC Service Utility software (free) in order to "Reset the Protection Counter". This is an option within the utility.
Printer must be on when running the SSC utility.
Posted on Dec 02, 2008
SOURCE: printer showing error
If both lights are flashing, it means the Waste Ink Pads in your printer are saturated with ink and the waste ink "protection" counter has exceeded its limit. The Waste Ink Pads should be replaced as soon as possible. You can overcome this problem temporarily by using the SSC utility - download from
and use it to reset the Protection Counter. This will stop the lights flashing and restore normal operation.
However, remember that eventually ink will overflow from the waste ink area and make a dreadful mess, so you must change the waste ink pads before this happens. This requires the disassembly of the printer. This is quite straightforward once you know what to do.
If you decide to have a go at replacing the ink pads yourself, post a new comment, and I will provide further help.
Posted on Feb 27, 2009
this means your printer waste pads are full and the printer needs to be reset for it to work again or it can just be reset
Posted on Sep 25, 2009
Tips for a great answer:
Apr 09, 2016 | Ricoh Aficio SP 100 e Laser Printer -...
Sep 27, 2017 | Brother DCP 165C Compact Color Inkjet...
Sep 25, 2009 | Epson Stylus Photo RX500 Printer
Jul 27, 2009 | Epson Stylus CX6400 All-In-One InkJet...
Jul 17, 2009 | Epson Stylus CX6400 All-In-One InkJet...
Dec 12, 2008 | Epson Stylus RX500 All-In-One InkJet...
Oct 28, 2008 | Epson Stylus C44UX InkJet Printer
Jan 01, 2008 | Epson Stylus CX6400 All-In-One InkJet...
29 people viewed this question
Usually answered in minutes!